+++ /dev/null
-/*
- * (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * This file contains the configuration parameters for the VCT board
- * family:
- *
- * vct_premium
- * vct_premium_small
- * vct_premium_onenand
- * vct_premium_onenand_small
- * vct_platinum
- * vct_platinum_small
- * vct_platinum_onenand
- * vct_platinum_onenand_small
- * vct_platinumavc
- * vct_platinumavc_small
- * vct_platinumavc_onenand
- * vct_platinumavc_onenand_small
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CPU_CLOCK_RATE 324000000 /* Clock for the MIPS core */
-#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2)
-
-#define CONFIG_SKIP_LOWLEVEL_INIT /* SDRAM is initialized by the bootstrap code */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 << 10)
-#define CONFIG_SYS_MALLOC_LEN (1 << 20)
-#define CONFIG_SYS_BOOTPARAMS_LEN (128 << 10)
-#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
-
-#if !defined(CONFIG_VCT_NAND) && !defined(CONFIG_VCT_ONENAND)
-#define CONFIG_VCT_NOR
-#endif
-
-/*
- * UART
- */
-#ifdef CONFIG_VCT_PLATINUMAVC
-#define UART_1_BASE 0xBDC30000
-#else
-#define UART_1_BASE 0xBF89C000
-#endif
-
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_COM1 UART_1_BASE
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550_CLK 921600
-
-/*
- * SDRAM
- */
-#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_MBYTES_SDRAM 128
-#define CONFIG_SYS_MEMTEST_START 0x80200000
-#define CONFIG_SYS_MEMTEST_END 0x80400000
-#define CONFIG_SYS_LOAD_ADDR 0x80400000 /* default load address */
-
-#if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)
-/*
- * SMSC91C11x Network Card
- */
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_BASE 0x00000000
-#define CONFIG_SMC911X_32_BIT
-#define CONFIG_NET_RETRY_COUNT 20
-#endif
-
-/*
- * Commands
- */
-#define CONFIG_CMD_EEPROM
-
-/*
- * Only Premium/Platinum have ethernet support right now
- */
-#if (defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)) && \
- !defined(CONFIG_VCT_SMALL_IMAGE)
-#endif
-
-/*
- * Only Premium/Platinum have USB-EHCI support right now
- */
-#if (defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)) && \
- !defined(CONFIG_VCT_SMALL_IMAGE)
-#endif
-
-#if defined(CONFIG_CMD_USB)
-#define CONFIG_SUPPORT_VFAT
-
-/*
- * USB/EHCI
- */
-#define CONFIG_USB_EHCI_VCT /* on VCT platform */
-#define CONFIG_EHCI_MMIO_BIG_ENDIAN
-#define CONFIG_EHCI_DESC_BIG_ENDIAN
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */
-#endif /* CONFIG_CMD_USB */
-
-#if defined(CONFIG_VCT_NAND)
-#define CONFIG_CMD_NAND
-#endif
-
-#if defined(CONFIG_VCT_ONENAND)
-#define CONFIG_CMD_ONENAND
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_SUBNETMASK
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-#define CONFIG_CMDLINE_EDITING /* add command line history */
-
-/*
- * FLASH and environment organization
- */
-#if defined(CONFIG_VCT_NOR)
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_FLASH_NOT_MEM_MAPPED
-
-/*
- * We need special accessor functions for the CFI FLASH driver. This
- * can be enabled via the CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS option.
- */
-#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
-
-/*
- * For the non-memory-mapped NOR FLASH, we need to define the
- * NOR FLASH area. This can't be detected via the addr2info()
- * function, since we check for flash access in the very early
- * U-Boot code, before the NOR FLASH is detected.
- */
-#define CONFIG_FLASH_BASE 0xb0000000
-#define CONFIG_FLASH_END 0xbfffffff
-
-/*
- * CFI driver settings
- */
-#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
-#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */
-
-#define CONFIG_SYS_FLASH_BASE 0xb0000000
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
-/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-#endif /* CONFIG_ENV_IS_IN_FLASH */
-#endif /* CONFIG_VCT_NOR */
-
-#if defined(CONFIG_VCT_ONENAND)
-#define CONFIG_USE_ONENAND_BOARD_INIT
-#define CONFIG_ENV_IS_IN_ONENAND
-#define CONFIG_SYS_ONENAND_BASE 0x00000000 /* this is not real address */
-#define CONFIG_SYS_FLASH_BASE 0x00000000
-#define CONFIG_ENV_ADDR (128 << 10) /* after compr. U-Boot image */
-#define CONFIG_ENV_SIZE (128 << 10) /* erase size */
-#endif /* CONFIG_VCT_ONENAND */
-
-/*
- * I2C/EEPROM
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED 83000 /* 83 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7f
-
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#define CONFIG_SYS_GPIO_I2C_SCL 11
-#define CONFIG_SYS_GPIO_I2C_SDA 10
-
-#ifndef __ASSEMBLY__
-int vct_gpio_dir(int pin, int dir);
-void vct_gpio_set(int pin, int val);
-int vct_gpio_get(int pin);
-#endif
-
-#define I2C_INIT vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SCL, 1)
-#define I2C_ACTIVE vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 1)
-#define I2C_TRISTATE vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 0)
-#define I2C_READ vct_gpio_get(CONFIG_SYS_GPIO_I2C_SDA)
-#define I2C_SDA(bit) vct_gpio_set(CONFIG_SYS_GPIO_I2C_SDA, bit)
-#define I2C_SCL(bit) vct_gpio_set(CONFIG_SYS_GPIO_I2C_SCL, bit)
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-/* CAT24WC32 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */
- /* 32 byte page write mode using*/
- /* last 5 bits of the address */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-
-#define CONFIG_BOOTCOMMAND "run test3"
-
-/*
- * UBI configuration
- */
-#if defined(CONFIG_VCT_ONENAND)
-#define CONFIG_SYS_USE_UBI
-#define CONFIG_CMD_JFFS2
-#define CONFIG_RBTREE
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
-
-#define MTDIDS_DEFAULT "onenand0=onenand"
-#define MTDPARTS_DEFAULT "mtdparts=onenand:128k(u-boot)," \
- "128k(env)," \
- "20m(kernel)," \
- "-(rootfs)"
-#endif
-
-/*
- * We need a small, stripped down image to fit into the first 128k OneNAND
- * erase block (gzipped). This image only needs basic commands for FLASH
- * (NOR/OneNAND) usage and Linux kernel booting.
- */
-#if defined(CONFIG_VCT_SMALL_IMAGE)
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_IRQ
-#undef CONFIG_CMD_LOADY
-#undef CONFIG_CMD_REGINFO
-#undef CONFIG_CMD_STRINGS
-#undef CONFIG_CMD_TERMINAL
-
-#undef CONFIG_SMC911X
-#undef CONFIG_SYS_I2C_SOFT
-#undef CONFIG_SOURCE
-#undef CONFIG_SYS_LONGHELP
-#undef CONFIG_TIMESTAMP
-#endif /* CONFIG_VCT_SMALL_IMAGE */
-
-#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff