+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2013 Freescale Semiconductor, Inc.
*
* Configuration settings for Udoo board.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#include "mx6_common.h"
-#include "imx6_spl.h"
-
-/* Provide the MACH_TYPE value that the vendor kernel requires. */
-#define CONFIG_MACH_TYPE 4800
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (2 * SZ_1M)
-
-#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART2_BASE
-/* SATA Configs */
-
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_DWC_AHSATA
-#define CONFIG_SYS_SATA_MAX_DEVICE 1
-#define CONFIG_DWC_AHSATA_PORT_ID 0
-#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
-#define CONFIG_LBA48
-#define CONFIG_LIBATA
-#endif
-
-/* Network support */
-
-#define CONFIG_FEC_MXC
-#define CONFIG_MII
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 6
-
-#define CONFIG_SYS_MEMTEST_START 0x10000000
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
-
/* MMC Configuration */
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+#define CFG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_EXTRA_ENV_SETTINGS \
- "script=boot.scr\0" \
- "image=zImage\0" \
- "console=ttymxc1\0" \
- "splashpos=m,m\0" \
+ "console=ttymxc1,115200\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
- "fdt_file=undefined\0" \
+ "fdtfile=undefined\0" \
"fdt_addr=0x18000000\0" \
- "boot_fdt=try\0" \
+ "fdt_addr_r=0x18000000\0" \
"ip_dyn=yes\0" \
- "mmcdev=0\0" \
- "mmcpart=1\0" \
- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
- "update_sd_firmware_filename=u-boot.imx\0" \
- "update_sd_firmware=" \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "if mmc dev ${mmcdev}; then " \
- "if ${get_cmd} ${update_sd_firmware_filename}; then " \
- "setexpr fw_sz ${filesize} / 0x200; " \
- "setexpr fw_sz ${fw_sz} + 1; " \
- "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
- "fi; " \
- "fi\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "loadbootscript=" \
- "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootz ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs " \
- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
- "netboot=echo Booting from net ...; " \
- "run netargs; " \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "${get_cmd} ${image}; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "bootz ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
- "findfdt=" \
- "if test $board_rev = MX6Q ; then " \
- "setenv fdt_file imx6q-udoo.dtb; fi; " \
- "if test $board_rev = MX6DL ; then " \
- "setenv fdt_file imx6dl-udoo.dtb; fi; " \
- "if test $fdt_file = undefined; then " \
- "echo WARNING: Could not determine dtb to use; fi; \0"
-
-#define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loadimage; then " \
- "run mmcboot; " \
- "else run netboot; " \
- "fi; " \
- "fi; " \
- "else run netboot; fi"
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+ "mmcdev=2\0" \
+ "mmcrootfstype=ext4\0" \
+ "findfdt="\
+ "if test ${board_rev} = MX6Q; then " \
+ "setenv fdtfile imx6q-udoo.dtb; fi; " \
+ "if test ${board_rev} = MX6DL; then " \
+ "setenv fdtfile imx6dl-udoo.dtb; fi; " \
+ "if test ${fdtfile} = undefined; then " \
+ "echo WARNING: Could not determine dtb to use; fi\0" \
+ "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+ "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+ "ramdisk_addr_r=0x13000000\0" \
+ "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+ BOOTENV
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 2) \
+ func(SATA, sata, 0) \
+ func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+#include <linux/stringify.h>
/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
/* Environment organization */
-#define CONFIG_ENV_SIZE (8 * 1024)
-
-#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV 0
#endif /* __CONFIG_H * */
projects / platform / kernel / u-boot.git / blobdiff