Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig

[platform/kernel/u-boot.git] / include / configs / tricorder.h

diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 654f9b4..a0fd583 100644 (file)
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -16,14 +16,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* High Level Configuration Options */
-#define CONFIG_SYS_THUMB_BUILD
-#define CONFIG_OMAP                    /* in a TI OMAP core */
-/* Common ARM Erratas */
-#define CONFIG_ARM_ERRATA_454179
-#define CONFIG_ARM_ERRATA_430973
-#define CONFIG_ARM_ERRATA_621766
-
 #define CONFIG_MACH_TYPE               MACH_TYPE_TRICORDER
 /*
  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
@@ -54,14 +46,6 @@
 
 /* Hardware drivers */
 
-/* GPIO support */
-#define CONFIG_OMAP_GPIO
-
-/* GPIO banks */
-#define CONFIG_OMAP3_GPIO_2            /* GPIO32..63 are in GPIO bank 2 */
-
-/* LED support */
-
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    (-4)
@@ -71,7 +55,6 @@
 #define CONFIG_CONS_INDEX              3
 #define CONFIG_SYS_NS16550_COM3                OMAP34XX_UART3
 #define CONFIG_SERIAL3                 3
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600,\
                                        115200}
 
@@ -83,16 +66,13 @@
  
 
 /* EEPROM */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 #define CONFIG_SYS_EEPROM_BUS_NUM      1
 
 /* TWL4030 */
-#define CONFIG_TWL4030_POWER
 #define CONFIG_TWL4030_LED
 
 /* Board NAND Info */
-#define CONFIG_SYS_NO_FLASH            /* no NOR flash */
 #define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
 #define MTDIDS_DEFAULT                 "nand0=omap2-nand.0"
 #define MTDPARTS_DEFAULT               "mtdparts=omap2-nand.0:" \
@@ -118,16 +98,10 @@
 #define CONFIG_SYS_NAND_MAX_ECCPOS     56
 
 /* commands to include */
-#define CONFIG_CMD_MTDPARTS            /* Enable MTD parts commands */
 #define CONFIG_CMD_NAND                        /* NAND support */
 #define CONFIG_CMD_NAND_LOCK_UNLOCK    /* nand (un)lock commands */
-#define CONFIG_CMD_UBIFS               /* UBIFS commands */
-#define CONFIG_LZO                     /* LZO is needed for UBIFS */
-
-#undef CONFIG_CMD_JFFS2                        /* JFFS2 Support */
 
 /* needed for ubi */
-#define CONFIG_RBTREE
 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS
 
@@ -174,9 +148,6 @@
  * which will not be influenced by any data already on the device.
  */
 #ifdef CONFIG_FLASHCARD
-
-#define CONFIG_ENV_IS_NOWHERE
-
 /* the rdaddr is 16 MiB before the loadaddr */
 #define CONFIG_ENV_RDADDR      "rdaddr=0x81000000\0"
 
@@ -197,8 +168,6 @@
 
 #define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */
 
-#define CONFIG_ENV_IS_IN_NAND
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        CONFIG_COMMON_ENV_SETTINGS \
        "mmcargs=" \
@@ -292,7 +261,6 @@
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
 
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC