env: Finish migration of common ENV options

[platform/kernel/u-boot.git] / include / configs / tqma6.h

diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index e662e65..1ea6332 100644 (file)
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2013, 2014, 2017 Markus Niebel <Markus.Niebel@tq-group.com>
  *
  * Configuration settings for the TQ Systems TQMa6<Q,D,DL,S> module.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -18,11 +17,6 @@
 /* #endif */
 
 /* place code in last 4 MiB of RAM */
-#if defined(CONFIG_TQMA6S)
-#define CONFIG_SYS_TEXT_BASE           0x2fc00000
-#elif defined(CONFIG_TQMA6Q) || defined(CONFIG_TQMA6DL)
-#define CONFIG_SYS_TEXT_BASE           0x4fc00000
-#endif
 
 #include "mx6_common.h"
 
@@ -36,18 +30,10 @@
 
 #define CONFIG_MXC_UART
 
-/* SPI */
-#define CONFIG_MXC_SPI
-
 /* SPI Flash */
 
 #define TQMA6_SPI_FLASH_SECTOR_SIZE    SZ_64K
 
-#define CONFIG_SF_DEFAULT_BUS  0
-#define CONFIG_SF_DEFAULT_CS   0
-#define CONFIG_SF_DEFAULT_SPEED        50000000
-#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
-
 /* I2C Configs */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
@@ -57,19 +43,11 @@
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_I2C_SPEED           100000
 
-/* I2C SYSMON (LM75) */
-#define CONFIG_DTT_LM75
-#define CONFIG_DTT_MAX_TEMP            70
-#define CONFIG_DTT_MIN_TEMP            -30
-#define CONFIG_DTT_HYSTERESIS  3
-#define CONFIG_CMD_DTT
-
 /* I2C EEPROM (M24C64) */
 #define CONFIG_SYS_I2C_EEPROM_ADDR                     0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN                 2
 #define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_BITS          5 /* 32 Bytes */
 #define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_DELAY_MS      20
-#define CONFIG_CMD_EEPROM
 
 #define CONFIG_POWER
 #define CONFIG_POWER_I2C
@@ -81,33 +59,24 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
 /* USB Configs */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
-#define CONFIG_PHYLIB
-#define CONFIG_MII
 
 #define CONFIG_ARP_TIMEOUT             200UL
 
-#define CONFIG_ENV_SIZE                        (SZ_8K)
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2 * SZ_1M)
 
 #if defined(CONFIG_TQMA6X_MMC_BOOT)
 
-#define CONFIG_ENV_IS_IN_MMC
 #define TQMA6_UBOOT_OFFSET             SZ_1K
 #define TQMA6_UBOOT_SECTOR_START       0x2
 #define TQMA6_UBOOT_SECTOR_COUNT       0x7fe
 
-#define CONFIG_ENV_OFFSET              SZ_1M
 #define CONFIG_SYS_MMC_ENV_DEV         0
 
 #define TQMA6_FDT_OFFSET               (2 * SZ_1M)
@@ -177,18 +146,6 @@
 #define TQMA6_UBOOT_SIZE               (TQMA6_UBOOT_SECTOR_SIZE * \
                                         TQMA6_UBOOT_SECTOR_COUNT)
 
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_OFFSET              (TQMA6_UBOOT_SIZE)
-#define CONFIG_ENV_SECT_SIZE           TQMA6_SPI_FLASH_SECTOR_SIZE
-#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + \
-                                        CONFIG_ENV_SECT_SIZE)
-
-#define CONFIG_ENV_SPI_BUS             (CONFIG_SF_DEFAULT_BUS)
-#define CONFIG_ENV_SPI_CS              (CONFIG_SF_DEFAULT_CS)
-#define CONFIG_ENV_SPI_MAX_HZ          (CONFIG_SF_DEFAULT_SPEED)
-#define CONFIG_ENV_SPI_MODE            (CONFIG_SF_DEFAULT_MODE)
-
 #define TQMA6_FDT_OFFSET               (CONFIG_ENV_OFFSET_REDUND + \
                                         CONFIG_ENV_SECT_SIZE)
 #define TQMA6_FDT_SECT_SIZE            (TQMA6_SPI_FLASH_SECTOR_SIZE)
@@ -347,7 +304,6 @@
        TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS                                      \
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
@@ -373,8 +329,5 @@
 #endif
 
 /* Support at least the sensor on TQMa6 SOM */
-#if !defined(CONFIG_DTT_SENSORS)
-#define CONFIG_DTT_SENSORS             { 0 }
-#endif
 
 #endif /* __CONFIG_H */