+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2013 Stefan Roese <sr@denx.de>
- *
- * Configuration settings for the ProjectionDesign / Barco
- * Titanium board.
- *
- * Based on mx6qsabrelite.h which is:
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include "mx6_common.h"
-
-#define CONFIG_MX6Q
-
-/* Provide the MACH_TYPE value that the vendor kernel requires. */
-#define CONFIG_MACH_TYPE 3769
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024)
-
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE UART1_BASE
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED 100000
-
-/* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_SYS_FSL_USDHC_NUM 1
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_FEC_MXC_PHYADDR 4
-
-/* USB Configs */
-#define CONFIG_MXC_USB_PORT 1
-#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS 0
-
-#define CONFIG_SYS_MEMTEST_START 0x10000000
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (500 << 20))
-
-#define CONFIG_HOSTNAME "titanium"
-#define CONFIG_UBI_PART ubi
-#define CONFIG_UBIFS_VOLUME rootfs0
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel=" CONFIG_HOSTNAME "/uImage\0" \
- "kernel_fs=/boot/uImage\0" \
- "kernel_addr=11000000\0" \
- "dtb=" CONFIG_HOSTNAME "/" \
- CONFIG_HOSTNAME ".dtb\0" \
- "dtb_fs=/boot/" CONFIG_HOSTNAME ".dtb\0" \
- "dtb_addr=12800000\0" \
- "script=boot.scr\0" \
- "uimage=uImage\0" \
- "console=ttymxc0\0" \
- "baudrate=115200\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
- "mmcdev=0\0" \
- "mmcpart=1\0" \
- "uimage=uImage\0" \
- "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
- " ${script}\0" \
- "bootscript=echo Running bootscript from mmc ...; source\0" \
- "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
- "mmcroot=/dev/mmcblk0p2\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot} rootwait rw\0" \
- "bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
- " ${uimage}; bootm\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "addcon=setenv bootargs ${bootargs} console=ttymxc0," \
- "${baudrate}\0" \
- "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ubifs=" CONFIG_HOSTNAME "/ubifs.img\0" \
- "part=" __stringify(CONFIG_UBI_PART) "\0" \
- "boot_vol=0\0" \
- "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0" \
- "load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \
- "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
- " ${filesize}\0" \
- "upd_ubifs=run load_ubifs update_ubifs\0" \
- "init_ubi=nand erase.part ubi;ubi part ${part};" \
- "ubi create ${vol} c800000\0" \
- "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
- "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \
- " addcon addmtd;" \
- "bootm ${kernel_addr} - ${dtb_addr}\0" \
- "ubifsargs=set bootargs ubi.mtd=ubi " \
- "root=ubi:rootfs${boot_vol} rootfstype=ubifs\0" \
- "ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0" \
- "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \
- "ubifsload ${dtb_addr} ${dtb_fs};\0" \
- "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
- "addmtd;bootm ${kernel_addr} - ${dtb_addr}\0" \
- "load_kernel=tftp ${kernel_addr} ${kernel}\0" \
- "load_dtb=tftp ${dtb_addr} ${dtb}\0" \
- "net_nfs=run load_dtb load_kernel; " \
- "run nfsargs addip addcon addmtd;" \
- "bootm ${kernel_addr} - ${dtb_addr}\0" \
- "delenv=env default -a -f; saveenv; reset\0"
-
-#define CONFIG_BOOTCOMMAND "run nand_ubifs"
-
-/* Physical Memory Map */
-#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE (512 << 20)
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* Enable NAND support */
-#ifdef CONFIG_CMD_NAND
-
-/* NAND stuff */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-/* DMA stuff, needed for GPMI/MXS NAND support */
-
-/* Environment in NAND */
-
-#else /* CONFIG_CMD_NAND */
-
-/* Environment in MMC */
-#define CONFIG_SYS_MMC_ENV_DEV 0
-
-#endif /* CONFIG_CMD_NAND */
-
-/* UBI/UBIFS config options */
-
-#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff