Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / tcm-bf537.h

diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h
deleted file mode 100644 (file)
index 4d1cdb5..0000000
--- a/include/configs/tcm-bf537.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * U-Boot - Configuration file for TCM-BF537 board
- */
-
-#ifndef __CONFIG_TCM_BF537_H__
-#define __CONFIG_TCM_BF537_H__
-
-#include <asm/config-pre.h>
-
-/*
- * Processor Settings
- */
-#define CONFIG_BFIN_CPU             bf537-0.2
-#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
-
-/*
- * Clock Settings
- *     CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
- *     SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
- */
-/* CONFIG_CLKIN_HZ is any value in Hz                                  */
-#define CONFIG_CLKIN_HZ                        25000000
-/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN            */
-/*                                                1 = CLKIN / 2                */
-#define CONFIG_CLKIN_HALF              0
-/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass    */
-/*                                                1 = bypass PLL       */
-#define CONFIG_PLL_BYPASS              0
-/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL             */
-/* Values can range from 0-63 (where 0 means 64)                       */
-#define CONFIG_VCO_MULT                        21
-/* CCLK_DIV controls the core clock divider                            */
-/* Values can be 1, 2, 4, or 8 ONLY                                    */
-#define CONFIG_CCLK_DIV                        1
-/* SCLK_DIV controls the system clock divider                          */
-/* Values can range from 1-15                                          */
-#define CONFIG_SCLK_DIV                        4
-
-/* Decrease core voltage */
-#define CONFIG_VR_CTL_VAL (VLEV_115 | CLKBUFOE | GAIN_20 | FREQ_1000)
-
-/*
- * Memory Settings
- */
-#define CONFIG_MEM_ADD_WDTH    9
-#define CONFIG_MEM_SIZE                32
-
-#define CONFIG_EBIU_SDRRC_VAL  0x3f8
-#define CONFIG_EBIU_SDGCTL_VAL 0x9111cd
-
-#define CONFIG_EBIU_AMGCTL_VAL (AMBEN_ALL)
-#define CONFIG_EBIU_AMBCTL0_VAL        (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
-#define CONFIG_EBIU_AMBCTL1_VAL        (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
-
-#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN  (128 * 1024)
-
-/*
- * Network Settings
- */
-#ifndef __ADSPBF534__
-#define ADI_CMDS_NETWORK       1
-#define CONFIG_BFIN_MAC
-#define CONFIG_SMC911X         1
-#define CONFIG_SMC911X_BASE    0x20308000
-#define CONFIG_SMC911X_16_BIT
-#define CONFIG_NETCONSOLE      1
-#endif
-#define CONFIG_HOSTNAME                tcm-bf537
-
-/*
- * Flash Settings
- */
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
-#define CONFIG_SYS_FLASH_BASE          0x20000000
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
-#define CONFIG_SYS_MAX_FLASH_SECT      67
-
-/*
- * SPI Settings
- */
-#define CONFIG_BFIN_SPI
-#define CONFIG_ENV_SPI_MAX_HZ  30000000
-
-/*
- * Env Storage Settings
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET      0x8000
-#define CONFIG_ENV_SIZE                0x8000
-#define CONFIG_ENV_SECT_SIZE   0x8000
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
-#define ENV_IS_EMBEDDED
-#endif
-#ifdef ENV_IS_EMBEDDED
-/* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-# define LDS_BOARD_TEXT \
-       arch/blackfin/lib/built-in.o (.text*); \
-       arch/blackfin/cpu/built-in.o (.text*); \
-       . = DEFINED(env_offset) ? env_offset : .; \
-       common/env_embedded.o (.text*);
-#endif
-
-/*
- * I2C Settings
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_ADI
-
-/*
- * SPI_MMC Settings
- */
-#define CONFIG_MMC_SPI
-
-/*
- * Misc Settings
- */
-#define CONFIG_BAUDRATE                115200
-#define CONFIG_MISC_INIT_R
-#define CONFIG_RTC_BFIN
-#define CONFIG_UART_CONSOLE    0
-#define CONFIG_BOOTCOMMAND     "run flashboot"
-#define FLASHBOOT_ENV_SETTINGS \
-       "flashboot=flread 20040000 1000000 300000;" \
-       "bootm 0x1000000\0"
-#define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024))
-
-/*
- * Pull in common ADI header for remaining command/environment setup
- */
-#include <configs/bfin_adi_common.h>
-
-#endif