pci: Move CONFIG_PCI_PNP to Kconfig

[platform/kernel/u-boot.git] / include / configs / t4qds.h

diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index 658f8b2..0aba18b 100644 (file)
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -10,8 +10,6 @@
 #ifndef __T4QDS_H
 #define __T4QDS_H
 
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_CMD_REGINFO
 
 /* High Level Configuration Options */
@@ -32,10 +30,9 @@
 #define CONFIG_SYS_FSL_CPC             /* Corenet Platform Cache */
 #define CONFIG_SYS_NUM_CPC             CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_IFC                 /* Enable IFC Support */
-#define CONFIG_PCI                     /* Enable PCI/PCIE */
-#define CONFIG_PCIE1                   /* PCIE controler 1 */
-#define CONFIG_PCIE2                   /* PCIE controler 2 */
-#define CONFIG_PCIE3                   /* PCIE controler 3 */
+#define CONFIG_PCIE1                   /* PCIE controller 1 */
+#define CONFIG_PCIE2                   /* PCIE controller 2 */
+#define CONFIG_PCIE3                   /* PCIE controller 3 */
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
 
@@ -99,14 +96,12 @@
 #define CONFIG_DDR_SPD
 #define CONFIG_SYS_FSL_DDR3
 
-
 /*
  * IFC Definitions
  */
 #define CONFIG_SYS_FLASH_BASE  0xe0000000
 #define CONFIG_SYS_FLASH_BASE_PHYS     (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 
-
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SPL_TEXT_BASE
 #else
@@ -123,7 +118,7 @@
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR       0xfdd00000      /* Initial L1 address */
 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH     0xf
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW      0xfe0ec000
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW      0xfe03c000
 /* The assembler doesn't like typecast */
 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
        ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
@@ -142,7 +137,6 @@
  * shorted - index 1
  */
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         (get_bus_freq(0)/2)
@@ -155,19 +149,6 @@
 #define CONFIG_SYS_NS16550_COM3        (CONFIG_SYS_CCSRBAR+0x11D500)
 #define CONFIG_SYS_NS16550_COM4        (CONFIG_SYS_CCSRBAR+0x11D600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE     /* enable fit_format_{error,warning}() */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -232,8 +213,6 @@
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
-#define CONFIG_E1000
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 #define CONFIG_DOS_PARTITION
@@ -255,7 +234,6 @@
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 #ifdef CONFIG_FMAN_ENET
@@ -273,14 +251,8 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 
 #ifdef CONFIG_PCI
 #define CONFIG_CMD_PCI
@@ -324,7 +296,6 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                1000000
 
-
 #define CONFIG_BAUDRATE        115200
 
 #define CONFIG_HVBOOT                          \