global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

[platform/kernel/u-boot.git] / include / configs / synquacer.h

diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h
index 225d017..daa9bbe 100644 (file)
--- a/include/configs/synquacer.h
+++ b/include/configs/synquacer.h
@@ -6,13 +6,12 @@
 #define __CONFIG_H
 
 /* Timers for fasp(TIMCLK) */
-#define CONFIG_SYS_HZ                  1000            /* 1 msec */
 #define CONFIG_SYS_TIMERBASE           0x31080000      /* AP Timer 1 (ARM-SP804) */
 
 /*
  * SDRAM (for initialize)
  */
-#define CONFIG_SYS_SDRAM_BASE          (0x80000000)    /* Start address of DDR3 */
+#define CFG_SYS_SDRAM_BASE             (0x80000000)    /* Start address of DDR3 */
 #define PHYS_SDRAM_SIZE                        (0x7c000000)    /* Default size (2GB - Secure memory) */
 
 #define CONFIG_VERY_BIG_RAM                            /* SynQuacer supports up to 64GB */
@@ -23,7 +22,6 @@
 /*
  * Boot info
  */
-#define CONFIG_SYS_INIT_SP_ADDR                (0xe0000000)    /* stack of init proccess */
 
 /*
  * Hardware drivers support
@@ -34,38 +32,34 @@
 
 /* Serial (pl011)       */
 #define UART_CLK                       (62500000)
-#define CONFIG_SERIAL_MULTI
-#define CONFIG_PL011_SERIAL
 #define CONFIG_PL011_CLOCK             UART_CLK
 #define CONFIG_PL01x_PORTS             {(void *)(0x2a400000)}
 
-#define CONFIG_ENV_OVERWRITE           /* ethaddr can be reprogrammed */
-
 /* Support MTD */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
 #define CONFIG_SYS_FLASH_BASE          (0x08000000)
 #define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
 
-#define CONFIG_SYS_MEMTEST_START       (CONFIG_SYS_SDRAM_BASE + (512 * 1024))
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_SDRAM_BASE + PHYS_SDRAM_SIZE)
-
-#define CONFIG_BAUDRATE                        115200
-#define CONFIG_SYS_BAUDRATE_TABLE      {115200, 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_CBSIZE              1024
-#define CONFIG_SYS_MAXARGS             128
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
 /* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */
-/* #define CONFIG_SYS_PCI_64BIT                1 */
 
 #define DEFAULT_DFU_ALT_INFO "dfu_alt_info="                           \
-                       "mtd mx66u51235f=u-boot.bin raw 200000 100000;" \
+                       "mtd nor1=u-boot.bin raw 200000 100000;"        \
                        "fip.bin raw 180000 78000;"                     \
                        "optee.bin raw 500000 100000\0"
 
+/* GUIDs for capsule updatable firmware images */
+#define DEVELOPERBOX_UBOOT_IMAGE_GUID \
+       EFI_GUID(0x53a92e83, 0x4ef4, 0x473a, 0x8b, 0x0d, \
+                0xb5, 0xd8, 0xc7, 0xb2, 0xd6, 0x00)
+
+#define DEVELOPERBOX_FIP_IMAGE_GUID \
+       EFI_GUID(0x880866e9, 0x84ba, 0x4793, 0xa9, 0x08, \
+                0x33, 0xe0, 0xb9, 0x16, 0xf3, 0x98)
+
+#define DEVELOPERBOX_OPTEE_IMAGE_GUID \
+       EFI_GUID(0xc1b629f1, 0xce0e, 0x4894, 0x82, 0xbf, \
+                0xf0, 0xa3, 0x83, 0x87, 0xe6, 0x30)
+
 /* Distro boot settings */
-#ifndef CONFIG_SPL_BUILD
 #ifdef CONFIG_CMD_USB
 #define BOOT_TARGET_DEVICE_USB(func)   func(USB, usb, 0)
 #else
@@ -97,9 +91,6 @@
        BOOT_TARGET_DEVICE_NVME(func)   \
 
 #include <config_distro_bootcmd.h>
-#else /* CONFIG_SPL_BUILD */
-#define BOOTENV
-#endif
 
 #define        CONFIG_EXTRA_ENV_SETTINGS               \
        "fdt_addr_r=0x9fe00000\0"               \