config: Add a default CONFIG_SYS_PROMPT

[platform/kernel/u-boot.git] / include / configs / svm_sc8xx.h

diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h
index 3917a1b..f98bdc8 100644 (file)
--- a/include/configs/svm_sc8xx.h
+++ b/include/configs/svm_sc8xx.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2000, 2001, 2002
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -31,11 +15,14 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define        CONFIG_SYS_TEXT_BASE    0x40000000
+
 /* Custom configuration */
 /* SC823,SC850,SC860SAR, FEL8xx-AT(823/850/860) */
 /* SC85T,SC860T, FEL8xx-AT(855T/860T) */
 /*#define CONFIG_FEL8xx_AT */
 /*#define CONFIG_LCD */
+/*#define CONFIG_MPC8XX_LCD*/
 /* if core > 50MHz , un-comment CONFIG_BUS_DIV2 */
 /* #define CONFIG_50MHz */
 /* #define CONFIG_66MHz */
@@ -147,20 +134,14 @@
 
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DOC
 #define CONFIG_CMD_DATE
 
-
-#define CONFIG_NAND_LEGACY
-
 /*
  * Miscellaneous configurable options
  */
 #define        CONFIG_SYS_LONGHELP                     /* undef to save memory         */
-#define        CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt       */
 
 #ifdef  CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
@@ -179,8 +160,6 @@
 
 #define        CONFIG_SYS_HZ           1000            /* decrementer freq: 1 ms ticks */
 
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -195,9 +174,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define        CONFIG_SYS_INIT_RAM_END 0x2F00  /* End of used area in DPRAM    */
-#define        CONFIG_SYS_GBL_DATA_SIZE        64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define        CONFIG_SYS_INIT_RAM_SIZE        0x2F00  /* Size of used area in DPRAM   */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define        CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -365,6 +343,8 @@
 
 #undef CONFIG_IDE_8xx_PCCARD           /* Use IDE with PC Card Adapter */
 
+#define CONFIG_IDE_PREINIT     1       /* Use preinit IDE hook */
+#define CONFIG_IDE_INIT_POSTRESET      1       /* Use postreset IDE hook */
 #define        CONFIG_IDE_8xx_DIRECT   1       /* Direct IDE    not supported  */
 #undef CONFIG_IDE_LED                  /* LED   for ide not supported  */
 #undef CONFIG_IDE_RESET                /* reset for ide not supported  */
@@ -469,13 +449,4 @@
 #define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
 #define CONFIG_SYS_DOC_BASE 0x80000000
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */