Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig

[platform/kernel/u-boot.git] / include / configs / sunxi-common.h

diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 21371f4..d7133a7 100644 (file)
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -32,7 +32,6 @@
 #endif
 
 #ifdef CONFIG_ARM64
-#define CONFIG_BUILD_TARGET "u-boot.itb"
 #define CONFIG_SYS_BOOTM_LEN           (32 << 20)
 #endif
 
@@ -82,38 +81,30 @@
 
 #define CONFIG_SPL_BSS_MAX_SIZE                0x00080000 /* 512 KiB */
 
-#ifdef CONFIG_SUNXI_HIGH_SRAM
 /*
  * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
  * slightly bigger. Note that it is possible to map the first 32 KiB of the
  * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
  * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
  * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
+ * A64 and H5 also has SRAM A1 at 0x00010000, but no magic remap register
+ * is known yet.
+ * H6 has SRAM A1 at 0x00020000.
  */
-#define CONFIG_SYS_INIT_RAM_ADDR       0x10000
-#define CONFIG_SYS_INIT_RAM_SIZE       0x08000 /* FIXME: 40 KiB ? */
-#else
-#define CONFIG_SYS_INIT_RAM_ADDR       0x0
-#define CONFIG_SYS_INIT_RAM_SIZE       0x8000  /* 32 KiB */
-#endif
+#define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SUNXI_SRAM_ADDRESS
+/* FIXME: this may be larger on some SoCs */
+#define CONFIG_SYS_INIT_RAM_SIZE       0x8000 /* 32 KiB */
 
 #define CONFIG_SYS_INIT_SP_OFFSET \
        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM_0                   CONFIG_SYS_SDRAM_BASE
 #define PHYS_SDRAM_0_SIZE              0x80000000 /* 2 GiB */
 
 #ifdef CONFIG_AHCI
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SUNXI_AHCI
 #define CONFIG_SYS_64BIT_LBA
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID    1
-#define CONFIG_SYS_SCSI_MAX_LUN                1
-#define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                        CONFIG_SYS_SCSI_MAX_LUN)
 #endif
 
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -125,9 +116,6 @@
 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_MAX_NAND_DEVICE 8
-
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
 #endif
 
 #ifdef CONFIG_SPL_SPI_SUNXI
@@ -158,8 +146,6 @@
 #define CONFIG_SYS_MMC_ENV_DEV         0
 #endif
 #define CONFIG_SYS_MMC_MAX_DEVICE      4
-#elif defined(CONFIG_ENV_IS_NOWHERE)
-#define CONFIG_ENV_SIZE                        (128 << 10)
 #endif
 
 #ifndef CONFIG_MACH_SUN8I_V3S
@@ -187,8 +173,11 @@
 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 #endif
 
-#ifdef CONFIG_SUNXI_HIGH_SRAM
-#define CONFIG_SPL_TEXT_BASE           0x10060         /* sram start+header */
+/*
+ * We cannot use expressions here, because expressions won't be evaluated in
+ * autoconf.mk.
+ */
+#if CONFIG_SUNXI_SRAM_ADDRESS == 0x10000
 #define CONFIG_SPL_MAX_SIZE            0x7fa0          /* 32 KiB */
 #ifdef CONFIG_ARM64
 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */
@@ -196,8 +185,11 @@
 #else
 #define LOW_LEVEL_SRAM_STACK           0x00018000
 #endif /* !CONFIG_ARM64 */
+#elif CONFIG_SUNXI_SRAM_ADDRESS == 0x20000
+#define CONFIG_SPL_MAX_SIZE            0x7fa0          /* 32 KiB */
+/* end of SRAM A2 on H6 for now */
+#define LOW_LEVEL_SRAM_STACK           0x00118000
 #else
-#define CONFIG_SPL_TEXT_BASE           0x60            /* sram start+header */
 #define CONFIG_SPL_MAX_SIZE            0x5fa0          /* 24KB on sun4i/sun7i */
 #define LOW_LEVEL_SRAM_STACK           0x00008000      /* End of sram */
 #endif
@@ -265,9 +257,6 @@ extern int soft_i2c_gpio_scl;
 #endif
 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */
 
-/* GPIO */
-#define CONFIG_SUNXI_GPIO
-
 #ifdef CONFIG_VIDEO_SUNXI
 /*
  * The amount of RAM to keep free at the top of RAM when relocating u-boot,
@@ -286,27 +275,16 @@ extern int soft_i2c_gpio_scl;
 #endif /* CONFIG_VIDEO_SUNXI */
 
 /* Ethernet support */
-#ifdef CONFIG_SUN4I_EMAC
-#define CONFIG_MII                     /* MII PHY management           */
-#endif
 
 #ifdef CONFIG_SUN7I_GMAC
-#define CONFIG_MII                     /* MII PHY management           */
 #define CONFIG_PHY_REALTEK
 #endif
 
 #ifdef CONFIG_USB_EHCI_HCD
 #define CONFIG_USB_OHCI_NEW
-#define CONFIG_USB_OHCI_SUNXI
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 #endif
 
-#ifdef CONFIG_USB_KEYBOARD
-#define CONFIG_PREBOOT
-#endif
-
-#define CONFIG_MISC_INIT_R
-
 #ifndef CONFIG_SPL_BUILD
 
 #ifdef CONFIG_ARM64
@@ -405,6 +383,18 @@ extern int soft_i2c_gpio_scl;
 #define BOOT_TARGET_DEVICES_USB(func)
 #endif
 
+#ifdef CONFIG_CMD_PXE
+#define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
+#else
+#define BOOT_TARGET_DEVICES_PXE(func)
+#endif
+
+#ifdef CONFIG_CMD_DHCP
+#define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
+#else
+#define BOOT_TARGET_DEVICES_DHCP(func)
+#endif
+
 /* FEL boot support, auto-execute boot.scr if a script address was provided */
 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
        "bootcmd_fel=" \
@@ -420,8 +410,8 @@ extern int soft_i2c_gpio_scl;
        BOOT_TARGET_DEVICES_MMC(func) \
        BOOT_TARGET_DEVICES_SCSI(func) \
        BOOT_TARGET_DEVICES_USB(func) \
-       func(PXE, pxe, na) \
-       func(DHCP, dhcp, na)
+       BOOT_TARGET_DEVICES_PXE(func) \
+       BOOT_TARGET_DEVICES_DHCP(func)
 
 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
 #define BOOTCMD_SUNXI_COMPAT \
@@ -455,7 +445,6 @@ extern int soft_i2c_gpio_scl;
        "stdout=serial,vga\0" \
        "stderr=serial,vga\0"
 #elif CONFIG_DM_VIDEO
-#define CONFIG_SYS_WHITE_ON_BLACK
 #define CONSOLE_STDOUT_SETTINGS \
        "stdout=serial,vidconsole\0" \
        "stderr=serial,vidconsole\0"