Convert CONFIG_FLASH_CFI_DRIVER et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / strider.h

diff --git a/include/configs/strider.h b/include/configs/strider.h
index 14b03c8..972543d 100644 (file)
--- a/include/configs/strider.h
+++ b/include/configs/strider.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2014
- * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ * Dirk Eibach,  Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
  *
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -18,14 +17,8 @@
 #define CONFIG_MPC8308         1 /* MPC8308 CPU specific */
 #define CONFIG_STRIDER         1 /* STRIDER board specific */
 
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_LAST_STAGE_INIT
-
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC83xx_ESDHC_ADDR
 
-#define CONFIG_SYS_ALT_MEMTEST
-
 /*
  * System Clock Setup
  */
@@ -208,15 +201,12 @@
 /*
  * FLASH on the Local Bus
  */
-#define CONFIG_SYS_FLASH_CFI           /* use the Common Flash Interface */
-#define CONFIG_FLASH_CFI_DRIVER                /* use the CFI driver */
 #define CONFIG_SYS_FLASH_CFI_WIDTH     FLASH_CFI_16BIT
 #define CONFIG_FLASH_CFI_LEGACY
 #define CONFIG_SYS_FLASH_LEGACY_512Kx16
 
 #define CONFIG_SYS_FLASH_BASE          0xFE000000 /* FLASH base address */
 #define CONFIG_SYS_FLASH_SIZE          8 /* FLASH size is up to 8M */
-#define CONFIG_SYS_FLASH_PROTECTION    1 /* Use h/w Flash protection. */
 
 /* Window base at flash base */
 #define CONFIG_SYS_LBLAWBAR0_PRELIM    CONFIG_SYS_FLASH_BASE
@@ -278,7 +268,6 @@
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX      2
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -504,14 +493,12 @@ void fpga_control_clear(unsigned int bus, int pin);
 /*
  * TSEC
  */
-#define CONFIG_TSEC_ENET       /* TSEC ethernet support */
 #define CONFIG_SYS_TSEC1_OFFSET        0x24000
 #define CONFIG_SYS_TSEC1       (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 
 /*
  * TSEC ethernet configuration
  */
-#define CONFIG_MII             1 /* MII PHY management */
 #define CONFIG_TSEC1
 #define CONFIG_TSEC1_NAME      "eTSEC0"
 #define TSEC1_PHY_ADDR         1
@@ -618,7 +605,7 @@ void fpga_control_clear(unsigned int bus, int pin);
 #define CONFIG_LOADADDR        800000  /* default location for tftp and bootm */
 
 
-#define CONFIG_HOSTNAME                hrcon
+#define CONFIG_HOSTNAME                "hrcon"
 #define CONFIG_ROOTPATH                "/opt/nfsroot"
 #define CONFIG_BOOTFILE                "uImage"