+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2009
- * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
- */
-
-#ifndef _SPEAR_COMMON_H
-#define _SPEAR_COMMON_H
-/*
- * Common configurations used for both spear3xx as well as spear6xx
- */
-
-/* U-Boot Load Address */
-
-/* Ethernet driver configuration */
-#define CONFIG_MII
-#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
-
-/* USBD driver configuration */
-#if defined(CONFIG_SPEAR_USBTTY)
-#define CONFIG_DW_UDC
-#define CONFIG_USB_DEVICE
-#define CONFIG_USBD_HS
-#define CONFIG_USB_TTY
-
-#define CONFIG_USBD_PRODUCT_NAME "SPEAr SoC"
-#define CONFIG_USBD_MANUFACTURER "ST Microelectronics"
-
-#endif
-
-#define CONFIG_EXTRA_ENV_USBTTY "usbtty=cdc_acm\0"
-
-/* I2C driver configuration */
-#define CONFIG_SYS_I2C
-#if defined(CONFIG_SPEAR600)
-#define CONFIG_SYS_I2C_BASE 0xD0200000
-#elif defined(CONFIG_SPEAR300)
-#define CONFIG_SYS_I2C_BASE 0xD0180000
-#elif defined(CONFIG_SPEAR310)
-#define CONFIG_SYS_I2C_BASE 0xD0180000
-#elif defined(CONFIG_SPEAR320)
-#define CONFIG_SYS_I2C_BASE 0xD0180000
-#endif
-#define CONFIG_SYS_I2C_SPEED 400000
-#define CONFIG_SYS_I2C_SLAVE 0x02
-
-#define CONFIG_I2C_CHIPADDRESS 0x50
-
-/* Timer, HZ specific defines */
-
-/* Flash configuration */
-#if defined(CONFIG_FLASH_PNOR)
-#define CONFIG_SPEAR_EMI
-#else
-#define CONFIG_ST_SMI
-#endif
-
-#if defined(CONFIG_ST_SMI)
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 2
-#define CONFIG_SYS_FLASH_BASE 0xF8000000
-#define CONFIG_SYS_CS1_FLASH_BASE 0xF9000000
-#define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000
-#define CONFIG_SYS_FLASH_ADDR_BASE {CONFIG_SYS_FLASH_BASE, \
- CONFIG_SYS_CS1_FLASH_BASE}
-#define CONFIG_SYS_MAX_FLASH_SECT 128
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ)
-
-#endif
-
-/*
- * Serial Configuration (PL011)
- * CONFIG_PL01x_PORTS is defined in specific files
- */
-#define CONFIG_PL011_CLOCK (48 * 1000 * 1000)
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \
- 57600, 115200 }
-
-#define CONFIG_SYS_LOADS_BAUD_CHANGE
-
-/* NAND FLASH Configuration */
-#define CONFIG_SYS_NAND_SELF_INIT
-#define CONFIG_NAND_FSMC
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-/*
- * Default Environment Varible definitions
- */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * U-Boot Environment placing definitions.
- */
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-#ifdef CONFIG_ST_SMI
-/*
- * Environment is in serial NOR flash
- */
-#define CONFIG_SYS_MONITOR_LEN 0x00040000
-#define CONFIG_ENV_SECT_SIZE 0x00010000
-#define CONFIG_FSMTDBLK "/dev/mtdblock3 "
-
-#define CONFIG_BOOTCOMMAND "bootm 0xf8050000"
-
-#elif defined(CONFIG_SPEAR_EMI)
-/*
- * Environment is in parallel NOR flash
- */
-#define CONFIG_SYS_MONITOR_LEN 0x00060000
-#define CONFIG_ENV_SECT_SIZE 0x00020000
-#define CONFIG_FSMTDBLK "/dev/mtdblock3 "
-
-#define CONFIG_BOOTCOMMAND "cp.b 0x50080000 0x1600000 " \
- "0x4C0000; bootm 0x1600000"
-#endif
-
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
- CONFIG_SYS_MONITOR_LEN)
-#elif defined(CONFIG_ENV_IS_IN_NAND)
-/*
- * Environment is in NAND
- */
-
-#define CONFIG_ENV_OFFSET 0x60000
-#define CONFIG_ENV_RANGE 0x10000
-#define CONFIG_FSMTDBLK "/dev/mtdblock7 "
-
-#define CONFIG_BOOTCOMMAND "nand read.jffs2 0x1600000 " \
- "0x80000 0x4C0000; " \
- "bootm 0x1600000"
-#endif
-
-#define CONFIG_NFSBOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$(serverip):$(rootpath) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):" \
- "$(netmask):$(hostname):$(netdev):off " \
- "console=ttyAMA0,115200 $(othbootargs);" \
- "bootm; "
-
-#define CONFIG_RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw " \
- "console=ttyAMA0,115200 $(othbootargs);" \
- CONFIG_BOOTCOMMAND
-
-#define CONFIG_ENV_SIZE 0x02000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-/* Miscellaneous configurable options */
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_BOOT_PARAMS_ADDR 0x00000100
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_SYS_MEMTEST_START 0x00800000
-#define CONFIG_SYS_MEMTEST_END 0x04000000
-#define CONFIG_SYS_MALLOC_LEN (1024*1024)
-#define CONFIG_SYS_LOAD_ADDR 0x00800000
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* Physical Memory Map */
-#define PHYS_SDRAM_1 0x00000000
-#define PHYS_SDRAM_1_MAXSIZE 0x40000000
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR 0xD2800000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2000
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-#endif
projects / platform / kernel / u-boot.git / blobdiff