Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT

[platform/kernel/u-boot.git] / include / configs / socfpga_vining_fpga.h

diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h
index 1ccde1a..0c76a77 100644 (file)
--- a/include/configs/socfpga_vining_fpga.h
+++ b/include/configs/socfpga_vining_fpga.h
@@ -8,22 +8,13 @@
 
 #include <asm/arch/base_addr_ac5.h>
 
-/* U-Boot Commands */
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FAT_WRITE
 #define CONFIG_HW_WATCHDOG
 
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_LED
-
 /* Memory configurations */
 #define PHYS_SDRAM_1_SIZE              0x40000000      /* 1GiB on VINING_FPGA */
 
 /* Booting Linux */
-#define CONFIG_BOOTDELAY       5
 #define CONFIG_BOOTFILE                "openwrt-socfpga-socfpga_cyclone5_vining_fpga-fit-uImage.itb"
-#define CONFIG_BOOTARGS                "console=ttyS0," __stringify(CONFIG_BAUDRATE)
 #define CONFIG_BOOTCOMMAND     "run selboot"
 #define CONFIG_LOADADDR                0x01000000
 #define CONFIG_SYS_LOAD_ADDR   CONFIG_LOADADDR
@@ -44,28 +35,11 @@
  *   2 ... Bottom Green
  *   3 ... Bottom Red
  */
-#define CONFIG_STATUS_LED
-#define CONFIG_GPIO_LED
-#define CONFIG_BOARD_SPECIFIC_LED
-#define STATUS_LED_BIT         48
-#define STATUS_LED_STATE       STATUS_LED_OFF
-#define STATUS_LED_PERIOD      (CONFIG_SYS_HZ / 2)
-#define STATUS_LED_BIT1                53
-#define STATUS_LED_STATE1      STATUS_LED_OFF
-#define STATUS_LED_PERIOD1     (CONFIG_SYS_HZ / 2)
-#define STATUS_LED_BIT2                54
-#define STATUS_LED_STATE2      STATUS_LED_OFF
-#define STATUS_LED_PERIOD2     (CONFIG_SYS_HZ / 2)
-#define STATUS_LED_BIT3                65
-#define STATUS_LED_STATE3      STATUS_LED_OFF
-#define STATUS_LED_PERIOD3     (CONFIG_SYS_HZ / 2)
 
 /* Ethernet on SoC (EMAC) */
 #if defined(CONFIG_CMD_NET)
 #define CONFIG_BOOTP_SEND_HOSTNAME
 /* PHY */
-#define CONFIG_PHY_MICREL
-#define CONFIG_PHY_MICREL_KSZ9021
 #endif
 
 /* Extra Environment */
@@ -193,21 +167,6 @@
                "else echo \"Unsupported boot mode: \"${bootmode} ; "   \
                "fi\0"                                                  \
 
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_MTD_UBI_FASTMAP
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define MTDPARTS_DEFAULT                       \
-       "mtdparts=ff705000.spi.0:"              \
-               "1m(u-boot),"                   \
-               "64k(env1),"                    \
-               "64k(env2),"                    \
-               "256k(samtec1),"                \
-               "256k(samtec2),"                \
-               "-(rcvrfs);"    /* Recovery */  \
-
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 #define CONFIG_ENV_SECT_SIZE           (64 * 1024)
@@ -216,11 +175,6 @@
        (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
 
 #define CONFIG_MISC_INIT_R
-#define CONFIG_BOARD_LATE_INIT
-
-/* Enable DFU to SF and RAM */
-#define CONFIG_DFU_RAM
-#define CONFIG_DFU_SF
 
 /* Support changing the prompt string */
 #define CONFIG_CMDLINE_PS_SUPPORT