Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig

[platform/kernel/u-boot.git] / include / configs / socfpga_sockit.h

diff --git a/include/configs/socfpga_sockit.h b/include/configs/socfpga_sockit.h
index 747e988..57de60e 100644 (file)
--- a/include/configs/socfpga_sockit.h
+++ b/include/configs/socfpga_sockit.h
@@ -6,86 +6,23 @@
 #ifndef __CONFIG_TERASIC_SOCKIT_H__
 #define __CONFIG_TERASIC_SOCKIT_H__
 
-#include <asm/arch/socfpga_base_addrs.h>
+#include <asm/arch/base_addr_ac5.h>
 
-/* U-Boot Commands */
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FAT_WRITE
 #define CONFIG_HW_WATCHDOG
 
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DFU
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_GREPENV
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_USB_MASS_STORAGE
-
 /* Memory configurations */
 #define PHYS_SDRAM_1_SIZE              0x40000000      /* 1GiB on SoCDK */
 
 /* Booting Linux */
-#define CONFIG_BOOTDELAY       3
-#define CONFIG_BOOTFILE                "fitImage"
-#define CONFIG_BOOTARGS                "console=ttyS0," __stringify(CONFIG_BAUDRATE)
-#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
-#define CONFIG_BOOTCOMMAND     "run ramboot"
-#else
-#define CONFIG_BOOTCOMMAND     "run mmcload; run mmcboot"
-#endif
 #define CONFIG_LOADADDR                0x01000000
 #define CONFIG_SYS_LOAD_ADDR   CONFIG_LOADADDR
 
 /* Ethernet on SoC (EMAC) */
 #if defined(CONFIG_CMD_NET)
-
-/* PHY */
 #define CONFIG_PHY_MICREL
 #define CONFIG_PHY_MICREL_KSZ9021
-#define CONFIG_KSZ9021_CLK_SKEW_ENV    "micrel-ksz9021-clk-skew"
-#define CONFIG_KSZ9021_CLK_SKEW_VAL    0xf0f0
-#define CONFIG_KSZ9021_DATA_SKEW_ENV   "micrel-ksz9021-data-skew"
-#define CONFIG_KSZ9021_DATA_SKEW_VAL   0x0
-
 #endif
 
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_DWC2_REG_ADDR       SOCFPGA_USB1_ADDRESS
-#endif
-#define CONFIG_G_DNL_MANUFACTURER      "Terasic"
-
-/* Extra Environment */
-#define CONFIG_HOSTNAME                socfpga_sockit
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-       "verify=n\0" \
-       "loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-       "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
-               "bootm ${loadaddr} - ${fdt_addr}\0" \
-       "bootimage=zImage\0" \
-       "fdt_addr=100\0" \
-       "fdtimage=socfpga.dtb\0" \
-               "fsloadcmd=ext2load\0" \
-       "bootm ${loadaddr} - ${fdt_addr}\0" \
-       "mmcroot=/dev/mmcblk0p2\0" \
-       "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
-               " root=${mmcroot} rw rootwait;" \
-               "bootz ${loadaddr} - ${fdt_addr}\0" \
-       "mmcload=mmc rescan;" \
-               "load mmc 0:1 ${loadaddr} ${bootimage};" \
-               "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
-
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>