Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / socfpga_cyclone5.h

diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h
deleted file mode 100644 (file)
index c3d958c..0000000
--- a/include/configs/socfpga_cyclone5.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Copyright (C) 2014 Marek Vasut <marex@denx.de>
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-#ifndef __CONFIG_SOCFPGA_CYCLONE5_H__
-#define __CONFIG_SOCFPGA_CYCLONE5_H__
-
-#include <asm/arch/socfpga_base_addrs.h>
-#include "../../board/altera/socfpga/pinmux_config.h"
-#include "../../board/altera/socfpga/iocsr_config.h"
-#include "../../board/altera/socfpga/pll_config.h"
-
-/* U-Boot Commands */
-#define CONFIG_SYS_NO_FLASH
-#include <config_cmd_default.h>
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FAT_WRITE
-#define CONFIG_HW_WATCHDOG
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FPGA
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_GREPENV
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SETEXPR
-
-#define CONFIG_REGEX                   /* Enable regular expression support */
-
-/* Memory configurations */
-#define PHYS_SDRAM_1_SIZE              0x40000000      /* 1GiB on SoCDK */
-
-/* Booting Linux */
-#define CONFIG_BOOTDELAY       3
-#define CONFIG_BOOTFILE                "zImage"
-#define CONFIG_BOOTARGS                "console=ttyS0," __stringify(CONFIG_BAUDRATE)
-#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
-#define CONFIG_BOOTCOMMAND     "run ramboot"
-#else
-#define CONFIG_BOOTCOMMAND     "run mmcload; run mmcboot"
-#endif
-#define CONFIG_LOADADDR                0x8000
-#define CONFIG_SYS_LOAD_ADDR   CONFIG_LOADADDR
-
-/* Ethernet on SoC (EMAC) */
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_EMAC_BASE               SOCFPGA_EMAC1_ADDRESS
-#define CONFIG_PHY_INTERFACE_MODE      PHY_INTERFACE_MODE_RGMII
-
-/* PHY */
-#define CONFIG_PHY_MICREL
-#define CONFIG_PHY_MICREL_KSZ9021
-#define CONFIG_KSZ9021_CLK_SKEW_ENV    "micrel-ksz9021-clk-skew"
-#define CONFIG_KSZ9021_CLK_SKEW_VAL    0xf0f0
-#define CONFIG_KSZ9021_DATA_SKEW_ENV   "micrel-ksz9021-data-skew"
-#define CONFIG_KSZ9021_DATA_SKEW_VAL   0x0
-
-#endif
-
-/* Extra Environment */
-#define CONFIG_HOSTNAME                socfpga_cyclone5
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-       "verify=n\0" \
-       "loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-       "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
-               "bootm ${loadaddr} - ${fdt_addr}\0" \
-       "bootimage=zImage\0" \
-       "fdt_addr=100\0" \
-       "fdtimage=socfpga.dtb\0" \
-               "fsloadcmd=ext2load\0" \
-       "bootm ${loadaddr} - ${fdt_addr}\0" \
-       "mmcroot=/dev/mmcblk0p2\0" \
-       "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
-               " root=${mmcroot} rw rootwait;" \
-               "bootz ${loadaddr} - ${fdt_addr}\0" \
-       "mmcload=mmc rescan;" \
-               "load mmc 0:1 ${loadaddr} ${bootimage};" \
-               "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
-       "qspiroot=/dev/mtdblock0\0" \
-       "qspirootfstype=jffs2\0" \
-       "qspiboot=setenv bootargs " CONFIG_BOOTARGS \
-               " root=${qspiroot} rw rootfstype=${qspirootfstype};"\
-               "bootm ${loadaddr} - ${fdt_addr}\0"
-
-/* The rest of the configuration is shared */
-#include <configs/socfpga_common.h>
-
-#endif /* __CONFIG_SOCFPGA_CYCLONE5_H__ */