#ifndef __CONFIG_H
#define __CONFIG_H
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
-#define CONFIG_S5P 1 /* which is in a S5P Family */
-#define CONFIG_S5PC100 1 /* which is in a S5PC100 */
-
#include <asm/arch/cpu.h> /* get chip and board defs */
-#define CONFIG_ARCH_CPU_INIT
-
/* input clock of PLL: SMDKC100 has 12MHz input clock */
-#define CONFIG_SYS_CLK_FREQ 12000000
/* DRAM Base */
-#define CONFIG_SYS_SDRAM_BASE 0x30000000
+#define CFG_SYS_SDRAM_BASE 0x30000000
/* Text Base */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-
-/*
- * Size of malloc() pool
- * 1MB = 0x100000, 0x100000 = 1024 * 1024
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
-
/*
* select serial console configuration
*/
-#define CONFIG_SERIAL0 1 /* use SERIAL 0 on SMDKC100 */
-
-/* PWM */
-#define CONFIG_PWM 1
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BOOTCOMMAND "run ubifsboot"
-
-#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \
- " console=ttySAC0,115200n8" \
- " mem=128M"
-
-#define CONFIG_COMMON_BOOT "console=ttySAC0,115200n8" \
+#define COMMON_BOOT "console=ttySAC0,115200n8" \
" mem=128M " \
" " CONFIG_MTDPARTS_DEFAULT
-#define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x40000;" \
- " onenand write 0x32008000 0x0 0x40000\0"
-
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_UPDATEB \
+#define CFG_EXTRA_ENV_SETTINGS \
+ "updateb=" \
+ "onenand erase 0x0 0x40000;" \
+ "onenand write 0x32008000 0x0 0x40000\0" \
"updatek=" \
"onenand erase 0x60000 0x300000;" \
"onenand write 0x31008000 0x60000 0x300000\0" \
"flashboot=" \
"set bootargs root=/dev/mtdblock${bootblock} " \
"rootfstype=${rootfstype} " \
- "ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT ";" \
+ "ubi.mtd=${ubiblock} ${opts} " COMMON_BOOT ";" \
"run bootk\0" \
"ubifsboot=" \
"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
- " ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT "; " \
+ " ubi.mtd=${ubiblock} ${opts} " COMMON_BOOT "; " \
"run bootk\0" \
"boottrace=setenv opts initcall_debug; run bootcmd\0" \
"android=" \
"set bootargs root=ubi0!ramdisk ubi.mtd=${ubiblock} " \
- "rootfstype=ubifs init=/init.sh " CONFIG_COMMON_BOOT "; " \
+ "rootfstype=ubifs init=/init.sh " COMMON_BOOT "; " \
"run bootk\0" \
"nfsboot=" \
"set bootargs root=/dev/nfs ubi.mtd=${ubiblock} " \
"nfsroot=${nfsroot},nolock " \
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
- "${netmask}:nowplus:usb0:off " CONFIG_COMMON_BOOT "; " \
+ "${netmask}:nowplus:usb0:off " COMMON_BOOT "; " \
"run bootk\0" \
"ramboot=" \
- "set bootargs " CONFIG_RAMDISK_BOOT \
+ "set bootargs root=/dev/ram0 rw rootfstype=ext2" \
+ " console=ttySAC0,115200n8 mem=128M" \
" initrd=0x33000000,8M ramdisk=8192\0" \
"rootfstype=cramfs\0" \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"meminfo=mem=128M\0" \
"nfsroot=/nfsroot/arm\0" \
"bootblock=5\0" \
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5e00000)
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
/* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1 CFG_SYS_SDRAM_BASE /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE (128 << 20) /* 0x8000000, 128 MB Bank #1 */
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */
-
-#if !defined(CONFIG_NAND_SPL) && (CONFIG_SYS_TEXT_BASE >= 0xc0000000)
-#define CONFIG_ENABLE_MMU
-#endif
-
-#ifdef CONFIG_ENABLE_MMU
-#define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000
-#else
-#define CONFIG_SYS_MAPPED_RAM_BASE CONFIG_SYS_SDRAM_BASE
-#endif
-
/*-----------------------------------------------------------------------
* Boot configuration
*/
-#define CONFIG_ENV_SIZE (128 << 10) /* 128KiB, 0x20000 */
-#define CONFIG_ENV_ADDR (256 << 10) /* 256KiB, 0x40000 */
-#define CONFIG_ENV_OFFSET (256 << 10) /* 256KiB, 0x40000 */
-
-#define CONFIG_USE_ONENAND_BOARD_INIT
-#define CONFIG_SAMSUNG_ONENAND 1
-#define CONFIG_SYS_ONENAND_BASE 0xE7100000
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
+#define CFG_SYS_ONENAND_BASE 0xE7100000
/*
* Ethernet Contoller driver
*/
#ifdef CONFIG_CMD_NET
-#define CONFIG_ENV_SROM_BANK 3 /* Select SROM Bank-3 for Ethernet*/
+#define CFG_ENV_SROM_BANK 3 /* Select SROM Bank-3 for Ethernet*/
#endif /* CONFIG_CMD_NET */
#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff