Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / sc_sps_1.h

diff --git a/include/configs/sc_sps_1.h b/include/configs/sc_sps_1.h
deleted file mode 100644 (file)
index 0c4ca21..0000000
--- a/include/configs/sc_sps_1.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * SchulerControl GmbH, SC_SPS_1 module config
- *
- * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- * on behalf of DENX Software Engineering GmbH
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-#ifndef __CONFIGS_SC_SPS_1_H__
-#define __CONFIGS_SC_SPS_1_H__
-
-/* System configuration */
-#define CONFIG_MX28                            /* i.MX28 SoC */
-#define MACH_TYPE_SC_SPS_1     4172
-#define CONFIG_MACH_TYPE       MACH_TYPE_SC_SPS_1
-
-/* U-Boot Commands */
-#define CONFIG_SYS_NO_FLASH
-#include <config_cmd_default.h>
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
-
-/* Memory configuration */
-#define CONFIG_NR_DRAM_BANKS           1               /* 1 bank of DRAM */
-#define PHYS_SDRAM_1                   0x40000000      /* Base address */
-#define PHYS_SDRAM_1_SIZE              0x40000000      /* Max 1 GB RAM */
-#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
-
-/* Environment */
-#define CONFIG_ENV_SIZE                        (16 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
-
-/* Environment is in MMC */
-#if defined(CONFIG_CMD_MMC) && defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_ENV_OFFSET              (256 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV         0
-#else
-#define CONFIG_ENV_IS_NOWHERE
-#endif
-
-/* FEC Ethernet on SoC */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_FEC_MXC
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_SMSC
-#endif
-
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_MXS_PORT0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT        1
-#define CONFIG_USB_STORAGE
-#endif
-
-/* Booting Linux */
-#define CONFIG_BOOTDELAY       3
-#define CONFIG_BOOTFILE                "uImage"
-#define CONFIG_BOOTARGS                "console=ttyAMA0,115200"
-#define CONFIG_BOOTCOMMAND     "bootm"
-#define CONFIG_LOADADDR                0x42000000
-#define CONFIG_SYS_LOAD_ADDR   CONFIG_LOADADDR
-
-/* Extra Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS                                      \
-       "update_sd_firmware_filename=u-boot.sd\0"                       \
-       "update_sd_firmware="           /* Update the SD firmware partition */ \
-               "if mmc rescan ; then "                                 \
-               "if tftp ${update_sd_firmware_filename} ; then "        \
-               "setexpr fw_sz ${filesize} / 0x200 ; "  /* SD block size */ \
-               "setexpr fw_sz ${fw_sz} + 1 ; "                         \
-               "mmc write ${loadaddr} 0x800 ${fw_sz} ; "               \
-               "fi ; "                                                 \
-               "fi\0"
-
-/* The rest of the configuration is shared */
-#include <configs/mxs.h>
-
-#endif /* __CONFIGS_SC_SPS_1_H__ */