Move defaults from config_cmd_default.h to Kconfig

[platform/kernel/u-boot.git] / include / configs / sbc405.h

diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index 6f0d728..b2adea9 100644 (file)
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -1,23 +1,7 @@
 /*
  * (C) Copyright 2001
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -33,7 +17,6 @@
  */
 
 #define CONFIG_405GP           1       /* This is a PPC405 CPU         */
-#define CONFIG_4xx             1       /* ...member of PPC4xx family   */
 #define CONFIG_SBC405          1       /* ...on a WR SBC405 board      */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFFC0000
@@ -64,7 +47,6 @@
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_PHY_ADDR                0       /* PHY address                  */
 #define CONFIG_PHY_RESET_DELAY 300     /* Intel LXT971A needs this     */
-#define CONFIG_NET_MULTI
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "bootargs=emac(0,0)host:/T221ppc/target/config/sbc405/vxWorks.st " \
@@ -104,8 +86,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_I2C
@@ -120,7 +100,6 @@
 
 #define CONFIG_SDRAM_BANK0     1       /* init onboard SDRAM bank 0    */
 
-#define CONFIG_ETHADDR DE:AD:BE:EF:01:01       /* Ethernet address     */
 #define CONFIG_IPADDR          192.168.193.102
 #define CONFIG_NETMASK         255.255.255.224
 #define CONFIG_SERVERIP                192.168.193.119
@@ -130,12 +109,8 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt       */
 
 #undef CONFIG_SYS_HUSH_PARSER                  /* use "hush" command parser    */
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#endif
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size      */
@@ -166,17 +141,15 @@
 #define CONFIG_SYS_LOAD_ADDR   0x100000        /* default load address */
 #define CONFIG_SYS_EXTBDINFO   1               /* To use extended board_info (bd_t) */
 
-#define CONFIG_SYS_HZ          1000            /* decrementer freq: 1 ms ticks */
-
 #define CONFIG_VERSION_VARIABLE        1       /* include version env variable */
 
 #define CONFIG_SYS_RX_ETH_BUFFER       16      /* use 16 rx buffer on 405 emac */
 
-#define CONFIG_HARD_I2C                1       /* I2C with hardware support    */
-#undef  CONFIG_SOFT_I2C                        /* I2C bit-banged               */
-#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
-#define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address  */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0          400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0          0x7F
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -187,6 +160,7 @@
 #define PCI_HOST_AUTO          2       /* detected via arbiter enable  */
 
 #define CONFIG_PCI                     /* include pci support          */
+#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_HOST        PCI_HOST_FORCE  /* select pci host function     */
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play         */
                                        /* resource configuration       */