Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / sama5d3xek.h

diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 3a712b5..4f579ad 100644 (file)
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -25,74 +25,26 @@
  */
 #define ATMEL_PMC_UHP                  (1 <<  6)
 
-/* board specific (not enough SRAM) */
-#define CONFIG_SAMA5D3_LCD_BASE                0x23E00000
-
 /* NOR flash */
 #ifdef CONFIG_MTD_NOR_FLASH
-#define CONFIG_SYS_FLASH_BASE          0x10000000
-#define CONFIG_SYS_MAX_FLASH_SECT      131
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
+#define CFG_SYS_FLASH_BASE             0x10000000
 #endif
 
 /* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE           0x20000000
-#define CONFIG_SYS_SDRAM_SIZE          0x20000000
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR                0x318000
-#else
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
-#endif
+#define CFG_SYS_SDRAM_BASE           0x20000000
+#define CFG_SYS_SDRAM_SIZE             0x20000000
 
 /* SerialFlash */
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_BASE           0x60000000
+#define CFG_SYS_NAND_BASE              0x60000000
 /* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE       (1 << 21)
+#define CFG_SYS_NAND_MASK_ALE  (1 << 21)
 /* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE       (1 << 22)
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#endif
-
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE          ATMEL_BASE_OHCI
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME          "sama5d3"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     3
+#define CFG_SYS_NAND_MASK_CLE  (1 << 22)
 #endif
 
-#define CONFIG_SYS_LOAD_ADDR                   0x22000000 /* load address */
-
 /* SPL */
-#define CONFIG_SPL_MAX_SIZE            0x18000
-#define CONFIG_SPL_BSS_START_ADDR      0x20000000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x80000
-#define CONFIG_SYS_SPL_MALLOC_START    0x20080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
-
-#define CONFIG_SYS_MONITOR_LEN         (512 << 10)
-
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
-#elif CONFIG_NAND_BOOT
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#endif
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE      0x800
-#define CONFIG_SYS_NAND_PAGE_COUNT     64
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     0x20000
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  0x0
 
 #endif