+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2010 Samsung Electronics
* Minkyu Kang <mk7.kang@samsung.com>
*
* Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_UNIVERSAL_H
#define __CONFIG_UNIVERSAL_H
-#include <configs/exynos4-dt.h>
-
-#define CONFIG_SYS_PROMPT "Universal # " /* Monitor Command Prompt */
-
-
-#define CONFIG_TIZEN /* TIZEN lib */
+#include <configs/exynos4-common.h>
/* Keep L2 Cache Disabled */
-#define CONFIG_SYS_L2CACHE_OFF 1
/* Universal has 2 banks of DRAM */
-#define CONFIG_NR_DRAM_BANKS 2
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
+#define CFG_SYS_SDRAM_BASE 0x40000000
+#define PHYS_SDRAM_1 CFG_SYS_SDRAM_BASE
#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))
-
-/* select serial console configuration */
-#define CONFIG_SERIAL2
-#define CONFIG_BAUDRATE 115200
-
-/* Console configuration */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-#define CONFIG_BOOTARGS "Please use defined boot"
-#define CONFIG_BOOTCOMMAND "run mmcboot"
-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
-
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
-
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)
-
-#define CONFIG_SYS_TEXT_BASE 0x44800000
-
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-
/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
-#define MTDIDS_DEFAULT "onenand0=samsung-onenand"
-
-#define MTDPARTS_DEFAULT "mtdparts=samsung-onenand:"\
- "128k(s-boot)"\
- ",896k(bootloader)"\
- ",256k(params)"\
- ",2816k(config)"\
- ",8m(csa)"\
- ",7m(kernel)"\
- ",1m(log)"\
- ",12m(modem)"\
- ",60m(qboot)"\
- ",-(UBI)\0"
-#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
+#define NORMAL_MTDPARTS_DEFAULT CONFIG_MTDPARTS_DEFAULT
#define MBRPARTS_DEFAULT "20M(permanent)"\
",20M(boot)"\
",100M(swap)"\
",-(UMS)\0"
-#define CONFIG_ENV_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
-#define CONFIG_BOOTBLOCK "10"
-#define CONFIG_UBIBLOCK "9"
-
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV
-#define CONFIG_ENV_SIZE 4096
-#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */
-
-#define CONFIG_ENV_UBIFS_OPTION " rootflags=bulk_read,no_chk_data_crc "
-#define CONFIG_ENV_FLASHBOOT CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
- "${mtdparts}"
-
-#define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}"
-
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"updateb=" \
"onenand erase 0x0 0x100000;" \
"onenand write 0x42008000 0x0 0x100000\0" \
"lpj=lpj=3981312\0" \
"ubifsboot=" \
"set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
- CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
- CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
+ "ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7 " \
+ "rootflags=bulk_read,no_chk_data_crc ${mtdparts} ${opts} " \
+ "${lcdinfo} ${console} ${meminfo}; run bootk\0" \
"tftpboot=" \
"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
- CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
- CONFIG_ENV_COMMON_BOOT \
+ "ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7 " \
+ "rootflags=bulk_read,no_chk_data_crc ${mtdparts} ${opts} " \
+ "${lcdinfo} ${console} ${meminfo}" \
"; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
"nfsboot=" \
"set bootargs root=/dev/nfs rw " \
"nfsroot=${nfsroot},nolock,tcp " \
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
- "${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
+ "${netmask}:generic:usb0:off ${console} ${meminfo}" \
"; run bootk\0" \
"ramfsboot=" \
"set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
"verify=n\0" \
"rootfstype=ext4\0" \
- "console=" CONFIG_DEFAULT_CONSOLE \
- "mtdparts=" MTDPARTS_DEFAULT \
+ "console=console=ttySAC1,115200n8\0" \
"mbrparts=" MBRPARTS_DEFAULT \
"meminfo=crashkernel=32M@0x50000000\0" \
"nfsroot=/nfsroot/arm\0" \
- "bootblock=" CONFIG_BOOTBLOCK "\0" \
- "ubiblock=" CONFIG_UBIBLOCK" \0" \
+ "bootblock=10\0" \
+ "ubiblock=9\0" \
"ubi=enabled\0" \
"loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
"mmcdev=0\0" \
"mmcrootpart=3\0" \
"opts=always_resume=1"
-#define CONFIG_USE_ONENAND_BOARD_INIT
-#define CONFIG_SAMSUNG_ONENAND
-#define CONFIG_SYS_ONENAND_BASE 0x0C000000
-
-#include <asm/arch/gpio.h>
-/*
- * I2C Settings
- */
-#define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_B7
-#define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_B6
-
-#define CONFIG_CMD_I2C
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED 50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE 0
-#define CONFIG_SOFT_I2C_READ_REPEATED_START
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS 7
-
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_MAX8998
-
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_S3C_UDC_OTG
-#define CONFIG_USB_GADGET_DUALSPEED
-
-/*
- * SPI Settings
- */
-#define CONFIG_SOFT_SPI
-#define CONFIG_SOFT_SPI_MODE SPI_MODE_3
-#define CONFIG_SOFT_SPI_GPIO_SCLK EXYNOS4_GPIO_Y31
-#define CONFIG_SOFT_SPI_GPIO_MOSI EXYNOS4_GPIO_Y33
-#define CONFIG_SOFT_SPI_GPIO_MISO EXYNOS4_GPIO_Y30
-#define CONFIG_SOFT_SPI_GPIO_CS EXYNOS4_GPIO_Y43
+#define CFG_SYS_ONENAND_BASE 0x0C000000
-#define SPI_DELAY udelay(1)
-#undef SPI_INIT
-#define SPI_SCL(bit) universal_spi_scl(bit)
-#define SPI_SDA(bit) universal_spi_sda(bit)
-#define SPI_READ universal_spi_read()
#ifndef __ASSEMBLY__
void universal_spi_scl(int bit);
void universal_spi_sda(int bit);
int universal_spi_read(void);
#endif
-/* Common misc for Samsung */
-#define CONFIG_MISC_COMMON
-
-#define CONFIG_MISC_INIT_R
-
-/* Download menu - Samsung common */
-#define CONFIG_LCD_MENU
-#define CONFIG_LCD_MENU_BOARD
-
/* Download menu - definitions for check keys */
#ifndef __ASSEMBLY__
-#include <power/max8998_pmic.h>
#define KEY_PWR_PMIC_NAME "MAX8998_PMIC"
#define KEY_PWR_STATUS_REG MAX8998_REG_STATUS1
#define KEY_VOL_DOWN_GPIO EXYNOS4_GPIO_X21
#endif /* __ASSEMBLY__ */
-/* LCD console */
-#define LCD_BPP LCD_COLOR16
-#define CONFIG_SYS_WHITE_ON_BLACK
-
-/*
- * LCD Settings
- */
-#define CONFIG_EXYNOS_FB
-#define CONFIG_LCD
-#define CONFIG_CMD_BMP
-#define CONFIG_BMP_16BPP
-#define CONFIG_LD9040
-#define CONFIG_VIDEO_BMP_GZIP
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
-
#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff