+++ /dev/null
-/*
- * Configuration for AMCC 460SX Ref (redwood)
- *
- * (C) Copyright 2008
- * Feng Kan, Applied Micro Circuits Corp., fkan@amcc.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*-----------------------------------------------------------------------
- * High Level Configuration Options
- *----------------------------------------------------------------------*/
-#define CONFIG_440 1 /* ... PPC460 family */
-#define CONFIG_460SX 1 /* ... PPC460 family */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
-
-#define CONFIG_SYS_TEXT_BASE 0xfffb0000
-
-/*-----------------------------------------------------------------------
- * Include common defines/options for all AMCC boards
- *----------------------------------------------------------------------*/
-#define CONFIG_HOSTNAME redwood
-
-#include "amcc-common.h"
-
-#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
-
-/*-----------------------------------------------------------------------
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_FLASH_BASE 0xfff00000 /* start of FLASH */
-#define CONFIG_SYS_ISRAM_BASE 0x90000000 /* internal SRAM */
-
-#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
-
-#define CONFIG_SYS_PCIE_MEMBASE 0x90000000 /* mapped PCIe memory */
-#define CONFIG_SYS_PCIE0_MEMBASE 0x90000000 /* mapped PCIe memory */
-#define CONFIG_SYS_PCIE1_MEMBASE 0xa0000000 /* mapped PCIe memory */
-#define CONFIG_SYS_PCIE_MEMSIZE 0x01000000
-
-#define CONFIG_SYS_PCIE0_XCFGBASE 0xb0000000
-#define CONFIG_SYS_PCIE1_XCFGBASE 0xb2000000
-#define CONFIG_SYS_PCIE2_XCFGBASE 0xb4000000
-#define CONFIG_SYS_PCIE0_CFGBASE 0xb6000000
-#define CONFIG_SYS_PCIE1_CFGBASE 0xb8000000
-#define CONFIG_SYS_PCIE2_CFGBASE 0xba000000
-
-/* PCIe mapped UTL registers */
-#define CONFIG_SYS_PCIE0_REGBASE 0xd0000000
-#define CONFIG_SYS_PCIE1_REGBASE 0xd0010000
-#define CONFIG_SYS_PCIE2_REGBASE 0xd0020000
-
-/* System RAM mapped to PCI space */
-#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
-
-#define CONFIG_SYS_FPGA_BASE 0xe2000000 /* epld */
-#define CONFIG_SYS_OPER_FLASH 0xe7000000 /* SRAM - OPER Flash */
-
-/*
- * Serial Port
- */
-#define CONFIG_CONS_INDEX 1 /* Use UART0 */
-
-/*-----------------------------------------------------------------------
- * Initial RAM & stack pointer (placed in internal SRAM)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_TEMP_STACK_OCM 1
-#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-
-/*-----------------------------------------------------------------------
- * DDR SDRAM
- *----------------------------------------------------------------------*/
-#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
-#define CONFIG_DDR_ECC 1 /* with ECC support */
-
-#define CONFIG_SYS_SPD_MAX_DIMMS 2
-
-/* SPD i2c spd addresses */
-#define SPD_EEPROM_ADDRESS {IIC0_DIMM0_ADDR, IIC0_DIMM1_ADDR}
-#define IIC0_DIMM0_ADDR 0x53
-#define IIC0_DIMM1_ADDR 0x52
-
-/*-----------------------------------------------------------------------
- * I2C
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-
-#define IIC0_BOOTPROM_ADDR 0x50
-#define IIC0_ALT_BOOTPROM_ADDR 0x54
-
-/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_NOPROBES { {0, 0x50}, {0, 0x52}, {0, 0x53}, {0, 0x54} }
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
-
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#undef CONFIG_ENV_IS_IN_NVRAM /* ... not in NVRAM */
-#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment uses flash */
-#undef CONFIG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
-
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_AMCC_DEF_ENV \
- CONFIG_AMCC_DEF_ENV_POWERPC \
- CONFIG_AMCC_DEF_ENV_NOR_UPD \
- "kernel_addr=fc000000\0" \
- "fdt_addr=fc1e0000\0" \
- "ramdisk_addr=fc200000\0" \
- ""
-
-/*----------------------------------------------------------------------------+
-| Commands in addition to amcc-common.h
-+----------------------------------------------------------------------------*/
-#define CONFIG_CMD_SDRAM
-
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-
-#define CONFIG_IBM_EMAC4_V4 1
-#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
-#define CONFIG_PHY_RESET_DELAY 1000
-#define CONFIG_M88E1141_PHY 1 /* Enable phy */
-#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
-
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
-#define CONFIG_PHY1_ADDR 1 /* PHY address, See schematics */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*-----------------------------------------------------------------------
- * FLASH related
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
-#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per device */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
-#define CONFIG_ENV_ADDR 0xfffa0000
-#define CONFIG_ENV_SIZE 0x10000 /* Size of Environment vars */
-#endif /* CONFIG_ENV_IS_IN_FLASH */
-
-/*---------------------------------------------------------------------------*/
-
-#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff