Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h

[platform/kernel/u-boot.git] / include / configs / qemu-ppce500.h

diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h
index 03b0896..60a17db 100644 (file)
--- a/include/configs/qemu-ppce500.h
+++ b/include/configs/qemu-ppce500.h
@@ -13,17 +13,8 @@
 
 #define CONFIG_SYS_RAMBOOT
 
-#define CONFIG_PCI1            1       /* PCI controller 1 */
-#define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
-#define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
-
-#define CONFIG_ENV_OVERWRITE
-
 #define CONFIG_ENABLE_36BIT_PHYS
 
-#define CONFIG_ADDR_MAP
-#define CONFIG_SYS_NUM_ADDR_MAP                16      /* number of TLB1 entries */
-
 /* Needed to fill the ccsrbar pointer */
 
 /* Virtual address to CCSRBAR */
@@ -40,7 +31,7 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 
 /* Virtual address range for PCI region maps */
 #define CONFIG_SYS_PCI_MAP_START       0x80000000
-#define CONFIG_SYS_PCI_MAP_END         0xe8000000
+#define CONFIG_SYS_PCI_MAP_END         0xe0000000
 
 /* Virtual address to a temporary map if we need it (max 128MB) */
 #define CONFIG_SYS_TMPVIRT             0xe8000000
@@ -52,14 +43,8 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x00000000
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 
-#define CONFIG_CHIP_SELECTS_PER_CTRL   0
-
-#define CONFIG_SYS_CLK_FREQ        33000000
-
 #define CONFIG_SYS_BOOT_BLOCK          0x00000000      /* boot TLB */
 
-#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE
-
 #define CONFIG_HWCONFIG
 
 #define CONFIG_SYS_INIT_RAM_ADDR               0x00100000
@@ -71,36 +56,15 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
          CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 #define CONFIG_SYS_INIT_RAM_SIZE               0x00004000
 
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - \
-                                       GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_SP_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 #define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
-#define CONFIG_SYS_MALLOC_LEN          (4 * 1024 * 1024)
-
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    1
-#define CONFIG_SYS_NS16550_CLK         (get_bus_freq(0))
-
-#define CONFIG_SYS_BAUDRATE_TABLE      \
-       {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
-
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-
-#define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
-#endif /* CONFIG_PCI */
 
 #define CONFIG_LBA48
 
+/* RTC */
+#define CONFIG_RTC_PT7C4338
+
 /*
  * Environment
  */
@@ -110,7 +74,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 
 /*
  * For booting Linux, the board info and command line data
@@ -124,13 +87,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
  * Environment Configuration
  */
 #define CONFIG_ROOTPATH                "/opt/nfsroot"
-#define CONFIG_BOOTFILE                "uImage"
 #define CONFIG_UBOOTPATH       "u-boot.bin"    /* U-Boot image on TFTP server*/
 
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR                1000000
-
-#define CONFIG_BOOTCOMMAND             \
-       "test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdt_addr_r\0"
-
 #endif /* __QEMU_PPCE500_H */