+++ /dev/null
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Copied from lubbock.h
- *
- * (C) Copyright 2004
- * BEC Systems <http://bec-systems.com>
- * Cliff Brake <cliff.brake@gmail.com>
- * Configuation settings for the Accelent/Vibren PXA255 IDP
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/pxa-regs.h>
-
-/*
- * If we are developing, we might want to start U-Boot from RAM
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#undef CONFIG_SKIP_LOWLEVEL_INIT /* define for developing */
-#define CONFIG_SYS_TEXT_BASE 0x0
-
-/*
- * define the following to enable debug blinks. A debug blink function
- * must be defined in memsetup.S
- */
-#undef DEBUG_BLINK_ENABLE
-#undef DEBUG_BLINKC_ENABLE
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_CPU_PXA25X 1 /* This is an PXA250 CPU */
-
-#undef CONFIG_LCD
-#ifdef CONFIG_LCD
-#define CONFIG_SHARP_LM8V31
-#endif
-
-#define CONFIG_MMC 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_BOARD_LATE_INIT
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * PXA250 IDP memory map information
- */
-
-#define IDP_CS5_ETH_OFFSET 0x03400000
-
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE (PXA_CS5_PHYS + IDP_CS5_ETH_OFFSET + 0x300)
-#define CONFIG_SMC_USE_32_BIT 1
-/* #define CONFIG_SMC_USE_IOFUNCS */
-
-/* the following has to be set high -- suspect something is wrong with
- * with the tftp timeout routines. FIXME!!!
- */
-#define CONFIG_NET_RETRY_COUNT 100
-
-/*
- * select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */
-#define CONFIG_CONS_INDEX 3
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_DHCP
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTCOMMAND "bootm 40000"
-#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-/* #define CONFIG_INITRD_TAG 1 */
-
-/*
- * Current memory map for Vibren supplied Linux images:
- *
- * Flash:
- * 0 - 0x3ffff (size = 0x40000): bootloader
- * 0x40000 - 0x13ffff (size = 0x100000): kernel
- * 0x140000 - 0x1f3ffff (size = 0x1e00000): jffs
- *
- * RAM:
- * 0xa0008000 - kernel is loaded
- * 0xa3000000 - Uboot runs (48MB into RAM)
- *
- */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "prog_boot_mmc=" \
- "mw.b 0xa0000000 0xff 0x40000; " \
- "if mmcinit && " \
- "fatload mmc 0 0xa0000000 u-boot.bin; " \
- "then " \
- "protect off 0x0 0x3ffff; " \
- "erase 0x0 0x3ffff; " \
- "cp.b 0xa0000000 0x0 0x40000; " \
- "reset;" \
- "fi\0" \
- "prog_uzImage_mmc=" \
- "mw.b 0xa0000000 0xff 0x100000; " \
- "if mmcinit && " \
- "fatload mmc 0 0xa0000000 uzImage; " \
- "then " \
- "protect off 0x40000 0xfffff; " \
- "erase 0x40000 0xfffff; " \
- "cp.b 0xa0000000 0x40000 0x100000; " \
- "fi\0" \
- "prog_jffs_mmc=" \
- "mw.b 0xa0000000 0xff 0x1e00000; " \
- "if mmcinit && " \
- "fatload mmc 0 0xa0000000 root.jffs; " \
- "then " \
- "protect off 0x140000 0x1f3ffff; " \
- "erase 0x140000 0x1f3ffff; " \
- "cp.b 0xa0000000 0x140000 0x1e00000; " \
- "fi\0" \
- "boot_mmc=" \
- "if mmcinit && " \
- "fatload mmc 0 0xa1000000 uzImage && " \
- "then " \
- "bootm 0xa1000000; " \
- "fi\0" \
- "prog_boot_net=" \
- "mw.b 0xa0000000 0xff 0x100000; " \
- "if bootp 0xa0000000 u-boot.bin; " \
- "then " \
- "protect off 0x0 0x3ffff; " \
- "erase 0x0 0x3ffff; " \
- "cp.b 0xa0000000 0x0 0x40000; " \
- "reset; " \
- "fi\0" \
- "prog_uzImage_net=" \
- "mw.b 0xa0000000 0xff 0x100000; " \
- "if bootp 0xa0000000 uzImage; " \
- "then " \
- "protect off 0x40000 0xfffff; " \
- "erase 0x40000 0xfffff; " \
- "cp.b 0xa0000000 0x40000 0x100000; " \
- "fi\0" \
- "prog_jffs_net=" \
- "mw.b 0xa0000000 0xff 0x1e00000; " \
- "if bootp 0xa0000000 root.jffs; " \
- "then " \
- "protect off 0x140000 0x1f3ffff; " \
- "erase 0x140000 0x1f3ffff; " \
- "cp.b 0xa0000000 0x140000 0x1e00000; " \
- "fi\0"
-
-
-/* "erase_env=" */
-/* "protect off" */
-
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER 1
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */
-#else
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#endif
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_DEVICE_NULLDEV 1
-
-#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xa0800000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */
-
-#define RTC 1 /* enable 32KHz osc */
-
-#ifdef CONFIG_MMC
-#define CONFIG_PXA_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_SYS_MMC_BASE 0xF0000000
-#endif
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
-#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
-#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
-#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
-#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
-#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
-
-#define CONFIG_SYS_DRAM_BASE 0xa0000000
-#define CONFIG_SYS_DRAM_SIZE 0x04000000
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800
-
-/*
- * GPIO settings
- */
-
-#define CONFIG_SYS_GAFR0_L_VAL 0x80001005
-#define CONFIG_SYS_GAFR0_U_VAL 0xa5128012
-#define CONFIG_SYS_GAFR1_L_VAL 0x699a9558
-#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5aa6a
-#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
-#define CONFIG_SYS_GAFR2_U_VAL 0x2
-#define CONFIG_SYS_GPCR0_VAL 0x1800400
-#define CONFIG_SYS_GPCR1_VAL 0x0
-#define CONFIG_SYS_GPCR2_VAL 0x0
-#define CONFIG_SYS_GPDR0_VAL 0xc1818440
-#define CONFIG_SYS_GPDR1_VAL 0xfcffab82
-#define CONFIG_SYS_GPDR2_VAL 0x1ffff
-#define CONFIG_SYS_GPSR0_VAL 0x8000
-#define CONFIG_SYS_GPSR1_VAL 0x3f0002
-#define CONFIG_SYS_GPSR2_VAL 0x1c000
-
-#define CONFIG_SYS_PSSR_VAL 0x20
-
-#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10
-#define CONFIG_SYS_CKEN 0x0
-
-/*
- * Memory settings
- */
-#define CONFIG_SYS_MSC0_VAL 0x29DCA4D2
-#define CONFIG_SYS_MSC1_VAL 0x43AC494C
-#define CONFIG_SYS_MSC2_VAL 0x39D449D4
-#define CONFIG_SYS_MDCNFG_VAL 0x090009C9
-#define CONFIG_SYS_MDREFR_VAL 0x0085C017
-#define CONFIG_SYS_MDMRS_VAL 0x00220022
-#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
-#define CONFIG_SYS_SXCNFG_VAL 0x00000000
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL 0x00000003
-#define CONFIG_SYS_MCMEM0_VAL 0x00014405
-#define CONFIG_SYS_MCMEM1_VAL 0x00014405
-#define CONFIG_SYS_MCATT0_VAL 0x00014405
-#define CONFIG_SYS_MCATT1_VAL 0x00014405
-#define CONFIG_SYS_MCIO0_VAL 0x00014405
-#define CONFIG_SYS_MCIO1_VAL 0x00014405
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER 1
-
-#define CONFIG_SYS_MONITOR_BASE 0
-#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/* put cfg at end of flash for now */
-#define CONFIG_ENV_IS_IN_FLASH 1
- /* Addr of Environment Sector */
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SIZE - 0x40000)
-#define CONFIG_ENV_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */
-#define CONFIG_ENV_SECT_SIZE (PHYS_FLASH_SECT_SIZE / 16)
-
-#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff