Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / pogo_e02.h

diff --git a/include/configs/pogo_e02.h b/include/configs/pogo_e02.h
index 5660cb0..b135421 100644 (file)
--- a/include/configs/pogo_e02.h
+++ b/include/configs/pogo_e02.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2012
  * David Purdy <david.c.purdy@gmail.com>
@@ -6,87 +7,20 @@
  * (C) Copyright 2009
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _CONFIG_POGO_E02_H
 #define _CONFIG_POGO_E02_H
 
-/*
- * Machine type definition and ID
- */
-#define MACH_TYPE_POGO_E02             3542
-#define CONFIG_MACH_TYPE               MACH_TYPE_POGO_E02
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_FEROCEON_88FR131                /* CPU Core subversion */
-#define CONFIG_KW88F6281               /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
-
-/*
- * Commands configuration
- */
-#define CONFIG_SYS_NO_FLASH            /* Declare no flash (NOR/SPI) */
-#define CONFIG_SYS_MVFS
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_NAND
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
 #include "mv-common.h"
 
 /*
- *  Environment variables configurations
- */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_SECT_SIZE           0x20000 /* 128K */
-#else
-#define CONFIG_ENV_IS_NOWHERE
-#endif
-
-#define CONFIG_ENV_SIZE                        0x20000 /* 128k */
-#define CONFIG_ENV_OFFSET              0x60000 /* env starts here */
-
-/*
  * Default environment variables
  */
-#define CONFIG_BOOTCOMMAND \
-       "setenv bootargs $(bootargs_console); " \
-       "run bootcmd_usb; " \
-       "bootm 0x00800000 0x01100000"
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
-       "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
-       "32M(rootfs),-(data)\0"\
-       "mtdids=nand0=orion_nand\0"\
+#define CFG_EXTRA_ENV_SETTINGS \
        "bootargs_console=console=ttyS0,115200\0" \
        "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
        "ext2load usb 0:1 0x01100000 /uInitrd\0"
 
-/*
- * Ethernet Driver configuration
- */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_MVGBE_PORTS     {1, 0}  /* enable port 0 only */
-#define CONFIG_PHY_BASE_ADR    0
-#endif /* CONFIG_CMD_NET */
-
-/*
- * File system
- */
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_LZO
-
 #endif /* _CONFIG_POGO_E02_H */