configs: Migrate CONFIG_NR_DRAM_BANKS

[platform/kernel/u-boot.git] / include / configs / platinum.h

diff --git a/include/configs/platinum.h b/include/configs/platinum.h
index 4f78a3d..ae7fb10 100644 (file)
--- a/include/configs/platinum.h
+++ b/include/configs/platinum.h
@@ -1,15 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014, Barco (www.barco.com)
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __PLATINUM_CONFIG_H__
 #define __PLATINUM_CONFIG_H__
 
 /* SPL */
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
 
 /* Location in NAND to read U-Boot from */
 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)
@@ -18,18 +15,6 @@
 #include "mx6_common.h"
 
 /*
- * Console configuration
- */
-
-#define CONFIG_CMD_BMODE
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-
-/*
  * Hardware configuration
  */
 
@@ -54,18 +39,12 @@
 #define CONFIG_MII
 #define IMX_FEC_BASE                           ENET_BASE_ADDR
 
-#define CONFIG_PHYLIB
-
 /* USB config */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_MXC_USB_PORT                    1
 #define CONFIG_MXC_USB_PORTSC                  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS                   0
 
 /* Memory config */
-#define CONFIG_NR_DRAM_BANKS                   1
 #define PHYS_SDRAM                             MMDC0_ARB_BASE_ADDR
 #ifndef PHYS_SDRAM_SIZE
 #define PHYS_SDRAM_SIZE                                (1024 << 20)
@@ -85,7 +64,6 @@
 #ifdef CONFIG_CMD_NAND
 
 /* NAND config */
-#define CONFIG_NAND_MXS
 #ifndef CONFIG_SYS_NAND_MAX_CHIPS
 #define CONFIG_SYS_NAND_MAX_CHIPS              2
 #endif
@@ -95,12 +73,8 @@
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 /* DMA config, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
 
 /* Environment in NAND */
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET              (16 << 20)
 #define CONFIG_ENV_SECT_SIZE           (128 << 10)
 #define CONFIG_ENV_SIZE                        CONFIG_ENV_SECT_SIZE
@@ -111,7 +85,6 @@
 
 /* Environment in MMC */
 #define CONFIG_ENV_SIZE                        (8 << 10)
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET              (6 * 64 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV         0
 
@@ -122,7 +95,6 @@
  */
 
 /* Board startup config */
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_SYS_MEMTEST_START               PHYS_SDRAM
@@ -134,27 +106,7 @@
 /* Miscellaneous configurable options */
 #define CONFIG_PREBOOT
 
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE                      (CONFIG_SYS_CBSIZE + \
-                                                sizeof(CONFIG_SYS_PROMPT) + 16)
-
 /* MTD/UBI/UBIFS config */
-#define CONFIG_LZO
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_RBTREE
-
-#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
-#define MTDIDS_DEFAULT         "nand0=gpmi-nand"
-#define MTDPARTS_DEFAULT       "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
-                               "512k(env1),512k(env2),-(ubi)"
-#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
-#define MTDIDS_DEFAULT         "nand0=gpmi-nand"
-#define MTDPARTS_DEFAULT       "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
-                               "512k(env1),512k(env2),495M(ubi0)," \
-                               "14M(res0),2M(res1)," \
-                               "512k(res2),512k(res3),-(ubi1)"
-#endif
 
 /*
  * Environment configuration
@@ -183,8 +135,8 @@
        "baudrate=115200\0"                                             \
        "boot_scr=boot.uboot\0"                                         \
        "boot_vol=0\0"                                                  \
-       "mtdids="MTDIDS_DEFAULT"\0"                                     \
-       "mtdparts="MTDPARTS_DEFAULT"\0"                                 \
+       "mtdids="CONFIG_MTDIDS_DEFAULT"\0"                                      \
+       "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0"                                  \
        "mmcfs=ext2\0"                                                  \
        "mmcrootpart=1\0"                                               \
        \