Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / pepper.h

diff --git a/include/configs/pepper.h b/include/configs/pepper.h
deleted file mode 100644 (file)
index d9c84f2..0000000
--- a/include/configs/pepper.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright (C) 2013 Gumstix, Inc. - http://www.gumstix.com/
- *
- * SPDX-License-Identifier:     GPL-2.0+
- */
-
-#ifndef __CONFIG_PEPPER_H
-#define __CONFIG_PEPPER_H
-
-#define CONFIG_MMC
-#include <configs/ti_am335x_common.h>
-
-#undef CONFIG_BOARD_LATE_INIT
-
-/* Clock defines */
-#define V_OSCK                         24000000  /* Clock output from T2 */
-#define V_SCLK                         (V_OSCK)
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x50
-
-/* Mach type */
-#define MACH_TYPE_PEPPER               4207    /* Until the next sync */
-#define CONFIG_MACH_TYPE               MACH_TYPE_PEPPER
-
-#define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
-#define CONFIG_ENV_IS_NOWHERE
-
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-#define CONFIG_EXTRA_ENV_SETTINGS \
-       DEFAULT_LINUX_BOOT_ENV \
-       "bootdir=/boot\0" \
-       "bootfile=zImage\0" \
-       "fdtfile=am335x-pepper.dtb\0" \
-       "console=ttyO0,115200n8\0" \
-       "optargs=\0" \
-       "mmcdev=0\0" \
-       "mmcroot=/dev/mmcblk0p2 rw\0" \
-       "mmcrootfstype=ext4 rootwait\0" \
-       "mmcargs=setenv bootargs console=${console} " \
-               "${optargs} " \
-               "root=${mmcroot} " \
-               "rootfstype=${mmcrootfstype}\0" \
-       "bootenv=uEnv.txt\0" \
-       "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-       "importbootenv=echo Importing environment from mmc ...; " \
-               "env import -t ${loadaddr} ${filesize}\0" \
-       "mmcload=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}; " \
-               "load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-       "loaduimage=fatload mmc ${mmcdev}:1 ${loadaddr} uImage\0" \
-       "uimageboot=echo Booting from mmc${mmcdev} ...; " \
-               "run mmcargs; " \
-               "bootm ${loadaddr}\0" \
-       "mmcboot=echo Booting from mmc ...; " \
-               "run mmcargs; " \
-               "bootz ${loadaddr} - ${fdtaddr}\0" \
-       "ubiboot=echo Booting from nand (ubifs) ...; " \
-               "run ubiargs; run ubiload; " \
-               "bootz ${loadaddr} - ${fdtaddr}\0" \
-
-#define CONFIG_BOOTCOMMAND \
-       "mmc dev ${mmcdev}; if mmc rescan; then " \
-               "echo SD/MMC found on device ${mmcdev};" \
-               "if run loadbootenv; then " \
-                       "echo Loaded environment from ${bootenv};" \
-                       "run importbootenv;" \
-               "fi;" \
-               "if test -n $uenvcmd; then " \
-                       "echo Running uenvcmd ...;" \
-                       "run uenvcmd;" \
-               "fi;" \
-               "if run mmcload; then " \
-                       "run mmcboot;" \
-               "fi;" \
-               "if run loaduimage; then " \
-                       "run uimageboot;" \
-               "fi;" \
-       "fi;" \
-
-/* Serial console configuration */
-#define CONFIG_CONS_INDEX              1 /* UART0 */
-#define CONFIG_SERIAL1                 1
-#define CONFIG_SYS_NS16550_COM1                0x44e09000
-
-/* Ethernet support */
-#define CONFIG_PHY_GIGE
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR                        0
-#define CONFIG_PHY_MICREL
-#define CONFIG_PHY_MICREL_KSZ9021
-#define CONFIG_PHY_RESET_DELAY 1000
-
-/* SPL */
-#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
-
-#endif /* __CONFIG_PEPPER_H */