Removed unused references to CONFIG_SERIALx
[platform/kernel/u-boot.git] / include / configs / pengwyn.h
index 2fa280e..48f1f7b 100644 (file)
@@ -1,18 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * pengwyn.h
  *
  * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
  *
  * based on am335x_evm.h, Copyright (C) 2011 Texas Instruments Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_PENGWYN_H
 #define __CONFIG_PENGWYN_H
 
-#define CONFIG_SERIAL1
-#define CONFIG_CONS_INDEX              1
 
 #include <configs/ti_am335x_common.h>
 
@@ -23,8 +20,6 @@
 /* set env size */
 #define CONFIG_ENV_SIZE                        0x4000
 
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x80200000\0" \
@@ -82,8 +77,8 @@
                "tftp ${fdtaddr} ${fdtfile}; " \
                "run netargs; " \
                "bootz ${loadaddr} - ${fdtaddr}\0" \
-       "mtdids=" MTDIDS_DEFAULT "\0" \
-       "mtdparts=" MTDPARTS_DEFAULT "\0" \
+       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        "nandargs=setenv bootargs console=${console} " \
                "${optargs} " \
                "root=${nandroot} " \
 /* #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 */
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x200000
 
-#define MTDIDS_DEFAULT                 "nand0=omap2-nand.0"
 /* Size must be a multiple of Nand erase size (524288 b) */
-#define MTDPARTS_DEFAULT               "mtdparts=omap2-nand.0:512k(SPL)," \
-                                       "512k(SPL.backup1)," \
-                                       "512k(SPL.backup2)," \
-                                       "512k(SPL.backup3),1536k(u-boot)," \
-                                       "512k(u-boot-spl-os)," \
-                                       "512k(u-boot-env),5m(kernel),-(rootfs)"
 #define CONFIG_ENV_OFFSET              0x260000 /* environment starts here */
 #define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
 /* NAND: SPL falcon mode configs */
  * board schematic and physical port wired to each.  Then for host we
  * add mass storage support.
  */
-#define CONFIG_USB_MUSB_DSPS
-#define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE        MUSB_PERIPHERAL
 #define CONFIG_AM335X_USB1
 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 
-#if defined(CONFIG_SPL_BUILD)
-/* disable host part of MUSB in SPL */
-/* Disable CPSW SPL support so we fit within the 101KiB limit. */
-#endif
-
 /* Network */
 #define CONFIG_PHY_RESET       1
 #define CONFIG_PHY_NATSEMI
 #define CONFIG_PHY_REALTEK
 
-/* CPSW support */
-
 #endif /* ! __CONFIG_PENGWYN_H */