Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / origen.h

diff --git a/include/configs/origen.h b/include/configs/origen.h
index 3bedc47..fd4cc70 100644 (file)
--- a/include/configs/origen.h
+++ b/include/configs/origen.h
@@ -10,29 +10,11 @@
 
 #include <configs/exynos4-common.h>
 
-/* High Level Configuration Options */
-#define CONFIG_EXYNOS4210              1       /* which is a EXYNOS4210 SoC */
-#define CONFIG_ORIGEN                  1       /* working with ORIGEN*/
-
 /* ORIGEN has 4 bank of DRAM */
-#define CONFIG_SYS_SDRAM_BASE          0x40000000
-#define PHYS_SDRAM_1                   CONFIG_SYS_SDRAM_BASE
+#define CFG_SYS_SDRAM_BASE             0x40000000
+#define PHYS_SDRAM_1                   CFG_SYS_SDRAM_BASE
 #define SDRAM_BANK_SIZE                        (256 << 20)     /* 256 MB */
 
-/* memtest works on */
-#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-
-#define CONFIG_MACH_TYPE               MACH_TYPE_ORIGEN
-
-/* select serial console configuration */
-
-/* Console configuration */
-#define CONFIG_DEFAULT_CONSOLE         "console=ttySAC1,115200n8\0"
-
-#define CONFIG_SYS_MEM_TOP_HIDE        (1 << 20)       /* ram console */
-
-#define CONFIG_SYS_MONITOR_BASE        0x00000000
-
 /* Power Down Modes */
 #define S5P_CHECK_SLEEP                        0x00000BAD
 #define S5P_CHECK_DIDLE                        0xBAD00000
@@ -41,7 +23,7 @@
 /* MMC SPL */
 #define COPY_BL2_FNPTR_ADDR    0x02020030
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x40007000\0" \
        "rdaddr=0x48000000\0" \
        "kerneladdr=0x40007000\0" \
@@ -55,39 +37,5 @@
         "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
         "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
                 "source ${loadaddr}\0"
-#define CONFIG_BOOTCOMMAND \
-       "if mmc rescan; then " \
-               "echo SD/MMC found on device ${mmcdev};" \
-               "if run loadbootenv; then " \
-                       "echo Loaded environment from ${bootenv};" \
-                       "run importbootenv;" \
-               "fi;" \
-               "if test -n $uenvcmd; then " \
-                       "echo Running uenvcmd ...;" \
-                       "run uenvcmd;" \
-               "fi;" \
-               "if run loadbootscript; then " \
-                       "run bootscript; " \
-               "fi; " \
-       "fi;" \
-       "load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} "
-
-#define CONFIG_CLK_1000_400_200
-
-/* MIU (Memory Interleaving Unit) */
-#define CONFIG_MIU_2BIT_21_7_INTERLEAVED
-
-#define CONFIG_SYS_MMC_ENV_DEV         0
-#define RESERVE_BLOCK_SIZE             (512)
-#define BL1_SIZE                       (16 << 10) /*16 K reserved for BL1*/
-
-#define CONFIG_SPL_MAX_FOOTPRINT       (14 * 1024)
-
-#define CONFIG_SYS_INIT_SP_ADDR                0x02040000
-
-/* U-Boot copy size from boot Media to DRAM.*/
-#define COPY_BL2_SIZE          0x80000
-#define BL2_START_OFFSET       ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512)
-#define BL2_SIZE_BLOC_COUNT    (COPY_BL2_SIZE/512)
 
 #endif /* __CONFIG_H */