Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / openrd.h

diff --git a/include/configs/openrd.h b/include/configs/openrd.h
index 0165d9c..1e6b16b 100644 (file)
--- a/include/configs/openrd.h
+++ b/include/configs/openrd.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2009
  * Net Insight <www.netinsight.net>
@@ -7,94 +8,29 @@
  * (C) Copyright 2009
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _CONFIG_OPENRD_H
 #define _CONFIG_OPENRD_H
 
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_SHEEVA_88SV131  1       /* CPU Core subversion */
-#define CONFIG_KW88F6281       1       /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
-
-/*
- * Commands configuration
- */
-#define CONFIG_SYS_MVFS
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
 #include "mv-common.h"
 
 /*
  *  Environment variables configurations
  */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_ENV_SECT_SIZE           0x20000 /* 128K */
-#endif
 /*
  * max 4k env size is enough, but in case of nand
  * it has to be rounded to sector size
  */
-#define CONFIG_ENV_SIZE                        0x20000 /* 128k */
-#define CONFIG_ENV_ADDR                        0x60000
-#define CONFIG_ENV_OFFSET              0x60000 /* env starts here */
-/*
- * Environment is right behind U-Boot in flash. Make sure U-Boot
- * doesn't grow into the environment area.
- */
-#define CONFIG_BOARD_SIZE_LIMIT                CONFIG_ENV_OFFSET
 
 /*
  * Default environment variables
  */
-#define CONFIG_BOOTCOMMAND             "${x_bootcmd_kernel}; " \
-       "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
-       "${x_bootcmd_usb}; bootm 0x6400000;"
 
-#define CONFIG_EXTRA_ENV_SETTINGS      "x_bootargs=console=ttyS0,115200 " \
+#define CFG_EXTRA_ENV_SETTINGS "x_bootargs=console=ttyS0,115200 " \
        CONFIG_MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \
        "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0"      \
        "x_bootcmd_usb=usb start\0"                                     \
-       "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"           \
-       "mtdids="CONFIG_MTDIDS_DEFAULT"\0"                                      \
-       "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0"
-
-/*
- * Ethernet Driver configuration
- */
-#ifdef CONFIG_CMD_NET
-# ifdef CONFIG_BOARD_IS_OPENRD_BASE
-#  define CONFIG_MVGBE_PORTS   {1, 0}  /* enable port 0 only */
-# else
-#  define CONFIG_MVGBE_PORTS   {1, 1}  /* enable both ports */
-# endif
-# ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
-#  define CONFIG_PHY_BASE_ADR  0x0
-#  define PHY_NO               "88E1121"
-# else
-#  define CONFIG_PHY_BASE_ADR  0x8
-#  define PHY_NO               "88E1116"
-# endif
-#endif /* CONFIG_CMD_NET */
-
-/*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET     MV_SATA_PORT0_OFFSET
-#define CONFIG_SYS_ATA_IDE1_OFFSET     MV_SATA_PORT1_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
-
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_MVEBU_MMC
-#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
-#endif /* CONFIG_CMD_MMC */
+       "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"
 
 #endif /* _CONFIG_OPENRD_BASE_H */