Convert CONFIG_SYS_LOAD_ADDR to Kconfig

[platform/kernel/u-boot.git] / include / configs / omapl138_lcdk.h

diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index d4f404a..f68f7bd 100644 (file)
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -13,8 +13,6 @@
 /*
  * Board
  */
-#undef CONFIG_USE_SPIFLASH
-#undef CONFIG_SYS_USE_NOR
 
 /*
  * SoC Configuration
@@ -25,7 +23,7 @@
 #define CONFIG_SYS_TIMERBASE           DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK            clk_get(DAVINCI_AUXCLK_CLKID)
 #define CONFIG_SYS_HZ                  1000
-#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
 
 /*
  * Memory Info
@@ -39,10 +37,8 @@
 #define CONFIG_SPL_BSS_MAX_SIZE 0x1080000
 
 /* memtest start addr */
-#define CONFIG_SYS_MEMTEST_START       (PHYS_SDRAM_1 + 0x2000000)
 
 /* memtest will be run on 16MB */
-#define CONFIG_SYS_MEMTEST_END         (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
 
 #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (      \
        DAVINCI_SYSCFG_SUSPSRC_TIMER0 |         \
@@ -104,22 +100,10 @@
  * Serial Driver info
  */
 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
-#if !defined(CONFIG_DM_SERIAL)
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    -4      /* NS16550 register size */
-#define CONFIG_SYS_NS16550_COM1        DAVINCI_UART2_BASE /* Base address of UART2 */
-#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-#endif
 
 #define CONFIG_SYS_SPI_BASE            DAVINCI_SPI1_BASE
 #define CONFIG_SYS_SPI_CLK             clk_get(DAVINCI_SPI1_CLKID)
 
-#ifdef CONFIG_USE_SPIFLASH
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x8000
-#define CONFIG_SYS_SPI_U_BOOT_SIZE     0x30000
-#endif
-
 /*
  * I2C Configuration
  */
@@ -130,10 +114,7 @@
 /*
  * Flash & Environment
  */
-#ifdef CONFIG_NAND
-#define CONFIG_ENV_OFFSET              0x0 /* Block 0--not used by bootcode */
-#define CONFIG_ENV_SIZE                        (128 << 9)
-#define        CONFIG_SYS_NAND_USE_FLASH_BBT
+#ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 #define        CONFIG_SYS_NAND_PAGE_2K
 #define CONFIG_SYS_NAND_CS             3
@@ -164,38 +145,13 @@
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       10
 #define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_LOAD
 #endif
 
-#ifdef CONFIG_SYS_USE_NOR
-#define CONFIG_SYS_MAX_FLASH_BANKS     1 /* max number of flash banks */
-#define CONFIG_SYS_FLASH_SECT_SZ       (128 << 10) /* 128KB */
-#define CONFIG_ENV_OFFSET              (CONFIG_SYS_FLASH_SECT_SZ * 3)
-#define CONFIG_ENV_SIZE                        (128 << 10)
-#define CONFIG_SYS_FLASH_BASE          DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
-#define PHYS_FLASH_SIZE                        (8 << 20) /* Flash size 8MB */
-#define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\
-              + 3)
-#define CONFIG_ENV_SECT_SIZE           CONFIG_SYS_FLASH_SECT_SZ
-#endif
-
-#ifdef CONFIG_USE_SPIFLASH
-#define CONFIG_ENV_SIZE                        (64 << 10)
-#define CONFIG_ENV_OFFSET              (256 << 10)
-#define CONFIG_ENV_SECT_SIZE           (64 << 10)
-#endif
-
 /*
  * Network & Ethernet Configuration
  */
 #ifdef CONFIG_DRIVER_TI_EMAC
-#undef CONFIG_DRIVER_TI_EMAC_USE_RMII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
 #endif
 
@@ -205,8 +161,6 @@
 #define CONFIG_BOOTFILE                "zImage" /* Boot file name */
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_MX_CYCLIC
 
 /*
  * USB Configs
@@ -247,22 +201,8 @@
 #define CONFIG_CLOCKS
 #endif
 
-#if !defined(CONFIG_NAND) && \
-       !defined(CONFIG_SYS_USE_NOR) && \
-       !defined(CONFIG_USE_SPIFLASH)
-#define CONFIG_ENV_SIZE                (16 << 10)
-#endif
-
 /* SD/MMC */
 
-#ifdef CONFIG_ENV_IS_IN_MMC
-#undef CONFIG_ENV_SIZE
-#undef CONFIG_ENV_OFFSET
-#define CONFIG_ENV_SIZE                (16 << 10)      /* 16 KiB */
-#define CONFIG_ENV_OFFSET      (51 << 9)       /* Sector 51 */
-#endif
-
-#ifndef CONFIG_DIRECT_NOR_BOOT
 /* defines for SPL */
 #define CONFIG_SYS_SPL_MALLOC_START    (CONFIG_SYS_TEXT_BASE - \
                                                CONFIG_SYS_MALLOC_LEN)
@@ -270,7 +210,6 @@
 #define CONFIG_SPL_STACK       0x8001ff00
 #define CONFIG_SPL_MAX_FOOTPRINT       32768
 #define CONFIG_SPL_PAD_TO      32768
-#endif
 
 /* additions for new relocation code, must added to all boards */
 #define CONFIG_SYS_SDRAM_BASE          0xc0000000