Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / omapl138_lcdk.h

diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index 58fa5cc..bc707eb 100644 (file)
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -17,18 +17,14 @@
 /*
  * SoC Configuration
  */
-#define CONFIG_MACH_OMAPL138_LCDK
 #define CONFIG_SYS_CLK_FREQ            clk_get(DAVINCI_ARM_CLKID)
 #define CONFIG_SYS_OSCIN_FREQ          24000000
 #define CONFIG_SYS_TIMERBASE           DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK            clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ                  1000
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
 
 /*
  * Memory Info
  */
-#define CONFIG_SYS_MALLOC_LEN  (0x10000 + 1*1024*1024) /* malloc() len */
 #define PHYS_SDRAM_1           DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
 #define PHYS_SDRAM_1_SIZE      (128 << 20) /* SDRAM size 128MB */
 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
@@ -125,9 +121,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE     1 /* Max number of NAND devices */
 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
 #define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE      (2 << 10)
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    SZ_512K
 #define CONFIG_SYS_NAND_U_BOOT_DST     0xc1080000
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_NAND_U_BOOT_DST
@@ -140,25 +133,14 @@
                                22, 23, 24, 25, 26, 27, 28, 29, 30, 31, \
                                38, 39, 40, 41, 42, 43, 44, 45, 46, 47, \
                                54, 55, 56, 57, 58, 59, 60, 61, 62, 63 }
-#define CONFIG_SYS_NAND_PAGE_COUNT     64
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  0
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       10
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_NAND_LOAD
 #endif
 
 /*
  * Network & Ethernet Configuration
  */
 #ifdef CONFIG_DRIVER_TI_EMAC
-#undef CONFIG_DRIVER_TI_EMAC_USE_RMII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
 #endif
 
@@ -168,7 +150,6 @@
 #define CONFIG_BOOTFILE                "zImage" /* Boot file name */
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x700000)
 
 /*
  * USB Configs
@@ -180,12 +161,6 @@
  * Linux Information
  */
 #define LINUX_BOOT_PARAM_ADDR  (PHYS_SDRAM_1 + 0x100)
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTCOMMAND \
-               "run envboot; " \
-               "run mmcboot; "
 
 #define DEFAULT_LINUX_BOOT_ENV \
        "loadaddr=0xc0700000\0" \