ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
[platform/kernel/u-boot.git] / include / configs / omap3_logic.h
index 3dd6d32..13cd35b 100644 (file)
@@ -5,7 +5,7 @@
  * Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo
  * reference boards.
  *
- * SPDX-License-Identifier:    GPL-2.0+ 
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
  * High Level Configuration Options
  */
 #define CONFIG_OMAP                    /* in a TI OMAP core */
-#define CONFIG_OMAP34XX                        /* which is a 34XX */
 #define CONFIG_OMAP3_LOGIC             /* working with Logic OMAP boards */
 #define CONFIG_OMAP_GPIO
+#define CONFIG_OMAP_COMMON
+/* Common ARM Erratas */
+#define CONFIG_ARM_ERRATA_454179
+#define CONFIG_ARM_ERRATA_430973
+#define CONFIG_ARM_ERRATA_621766
 
 #define CONFIG_SYS_TEXT_BASE   0x80400000
 
 #define CONFIG_SDRC    /* The chip has SDRC controller */
 
 #include <asm/arch/cpu.h>      /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
 
 /*
  * Display CPU and Board information
 /*
  * I2C
  */
-#define CONFIG_HARD_I2C
-#define CONFIG_DRIVER_OMAP34XX_I2C
-
-#define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_I2C_SLAVE           1
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED    100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE    1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
 
 #define CONFIG_SYS_MAX_NAND_DEVICE     1               /* Max number of */
                                                        /* NAND devices */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV               "nand0"
  */
 #define CONFIG_SYS_TIMERBASE           (OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ                  1000
 
 /*
  * Physical Memory Map
  */
 
 /* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE               GPMC_SIZE_128M
-
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
 #if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE          PISMO1_NAND_BASE
+#define CONFIG_SYS_FLASH_BASE          NAND_BASE
 #elif defined(CONFIG_CMD_ONENAND)
-#define CONFIG_SYS_FLASH_BASE          PISMO1_ONEN_BASE
+#define CONFIG_SYS_FLASH_BASE          ONENAND_MAP
 #endif
 
 /* Monitor at start of flash */
 
 #if defined(CONFIG_CMD_NAND)
 #define CONFIG_NAND_OMAP_GPMC
-#define GPMC_NAND_ECC_LP_x16_LAYOUT    1
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
 #endif