Merge branch 'master' of git://git.denx.de/u-boot-arm

[platform/kernel/u-boot.git] / include / configs / omap3_beagle.h

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index a0f6829..bc3c45b 100644 (file)
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -101,6 +101,18 @@
 #define CONFIG_OMAP_HSMMC              1
 #define CONFIG_DOS_PARTITION           1
 
+/* Status LED */
+#define CONFIG_STATUS_LED              1
+#define CONFIG_BOARD_SPECIFIC_LED      1
+#define STATUS_LED_BIT                 0x01
+#define STATUS_LED_STATE               STATUS_LED_ON
+#define STATUS_LED_PERIOD              (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BIT1                        0x02
+#define STATUS_LED_STATE1              STATUS_LED_ON
+#define STATUS_LED_PERIOD1             (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BOOT                        STATUS_LED_BIT
+#define STATUS_LED_GREEN               STATUS_LED_BIT1
+
 /* DDR - I use Micron DDR */
 #define CONFIG_OMAP3_MICRON_DDR                1
 
@@ -114,6 +126,11 @@
 #define CONFIG_USB_TTY                 1
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV   1
 
+/* USB EHCI */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+
 /* commands to include */
 #include <config_cmd_default.h>
 
@@ -130,7 +147,9 @@
 
 #define CONFIG_CMD_I2C         /* I2C serial bus support       */
 #define CONFIG_CMD_MMC         /* MMC support                  */
+#define CONFIG_USB_STORAGE     /* USB storage support          */
 #define CONFIG_CMD_NAND                /* NAND support                 */
+#define CONFIG_CMD_LED         /* LED support                  */
 
 #undef CONFIG_CMD_FLASH                /* flinfo, erase, protect       */
 #undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
@@ -183,7 +202,7 @@
        "loadaddr=0x82000000\0" \
        "usbtty=cdc_acm\0" \
        "console=ttyS2,115200n8\0" \
-       "mpurate=500\0" \
+       "mpurate=auto\0" \
        "vram=12M\0" \
        "dvimode=1024x768MR-16@60\0" \
        "defaultdisplay=dvi\0" \
@@ -208,9 +227,9 @@
                "omapdss.def_disp=${defaultdisplay} " \
                "root=${nandroot} " \
                "rootfstype=${nandrootfstype}\0" \
-       "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-       "bootscript=echo Running bootscript from mmc ...; " \
-               "source ${loadaddr}\0" \
+       "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
+       "importbootenv=echo Importing environment from mmc ...; " \
+               "env import -t $loadaddr $filesize\0" \
        "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
        "mmcboot=echo Booting from mmc ...; " \
                "run mmcargs; " \
@@ -222,15 +241,19 @@
 
 #define CONFIG_BOOTCOMMAND \
        "if mmc rescan ${mmcdev}; then " \
-               "if run loadbootscript; then " \
-                       "run bootscript; " \
-               "else " \
-                       "if run loaduimage; then " \
-                               "run mmcboot; " \
-                       "else run nandboot; " \
-                       "fi; " \
-               "fi; " \
-       "else run nandboot; fi"
+               "echo SD/MMC found on device ${mmcdev};" \
+               "if run loadbootenv; then " \
+                       "run importbootenv;" \
+               "fi;" \
+               "if test -n $uenvcmd; then " \
+                       "echo Running uenvcmd ...;" \
+                       "run uenvcmd;" \
+               "fi;" \
+               "if run loaduimage; then " \
+                       "run mmcboot;" \
+               "fi;" \
+       "fi;" \
+       "run nandboot;" \
 
 #define CONFIG_AUTO_COMPLETE           1
 /*
@@ -299,7 +322,9 @@
 
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
-#define CONFIG_SYS_FLASH_BASE          boot_flash_base
+#if defined(CONFIG_CMD_NAND)
+#define CONFIG_SYS_FLASH_BASE          PISMO1_NAND_BASE
+#endif
 
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
@@ -309,18 +334,10 @@
 #define ONENAND_ENV_OFFSET             0x260000 /* environment starts here */
 #define SMNAND_ENV_OFFSET              0x260000 /* environment starts here */
 
-#define CONFIG_SYS_ENV_SECT_SIZE       boot_flash_sec
-#define CONFIG_ENV_OFFSET              boot_flash_off
+#define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
+#define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
 
-#ifndef __ASSEMBLY__
-extern unsigned int boot_flash_base;
-extern volatile unsigned int boot_flash_env_addr;
-extern unsigned int boot_flash_off;
-extern unsigned int boot_flash_sec;
-extern unsigned int boot_flash_type;
-#endif
-
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_RAM_ADDR       0x4020f800
 #define CONFIG_SYS_INIT_RAM_SIZE       0x800