Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / omap3_beagle.h

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 6563335..af7cb35 100644 (file)
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -18,39 +18,18 @@
  * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
  */
 
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
 /* NAND */
 #if defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_FLASH_BASE          NAND_BASE
-#define CONFIG_SYS_MAX_NAND_DEVICE      1
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT      64
-#define CONFIG_SYS_NAND_PAGE_SIZE       2048
-#define CONFIG_SYS_NAND_OOBSIZE         64
-#define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
+#define CFG_SYS_FLASH_BASE             NAND_BASE
+#define CFG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
                                          10, 11, 12, 13}
-#define CONFIG_SYS_NAND_ECCSIZE         512
-#define CONFIG_SYS_NAND_ECCBYTES        3
-#define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
-#define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
-#define CONFIG_SYS_ENV_SECT_SIZE        SZ_128K
+#define CFG_SYS_NAND_ECCSIZE         512
+#define CFG_SYS_NAND_ECCBYTES        3
 /* NAND: SPL falcon mode configs */
-#if defined(CONFIG_SPL_OS_BOOT)
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000
-#endif /* CONFIG_SPL_OS_BOOT */
 #endif /* CONFIG_MTD_RAW_NAND */
 
-/* USB EHCI */
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       147
-
 /* Enable Multi Bus support for I2C */
-#define CONFIG_I2C_MULTI_BUS
+#define CFG_I2C_MULTI_BUS
 
 /* DSS Support */
 
@@ -81,7 +60,7 @@
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
        func(LEGACY_MMC, legacy_mmc, 0) \
-       func(UBIFS, ubifs, 0) \
+       func(UBIFS, ubifs, 0, rootfs, rootfs) \
        func(NAND, nand, 0)
 
 #else /* !CONFIG_MTD_RAW_NAND */
@@ -94,7 +73,7 @@
 
 #include <config_distro_bootcmd.h>
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
        MEM_LAYOUT_ENV_SETTINGS \
        "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
        "fdt_high=0xffffffff\0" \
@@ -103,8 +82,6 @@
        "bootenv=uEnv.txt\0" \
        "bootfile=zImage\0" \
        "bootpart=0:2\0" \
-       "bootubivol=rootfs\0" \
-       "bootubipart=rootfs\0" \
        "usbtty=cdc_acm\0" \
        "mpurate=auto\0" \
        "buddy=none\0" \
@@ -211,7 +188,7 @@
                "${defargs} " \
                "${optargs} " \
                "root=${ramroot} ramdisk_size=${ramdisk_size} " \
-               "rootfstype=${ramrootfstype}\0" \
+               "rootfstype=${ramrootfstype}\0" \
        "ramboot=run mmcbootenv; " \
                "if run loadimage && run loaddtb && run loadramdisk; then " \
                        "echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} w/ramdisk ...; " \