Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / o3dnt.h

diff --git a/include/configs/o3dnt.h b/include/configs/o3dnt.h
deleted file mode 100644 (file)
index f0fceda..0000000
--- a/include/configs/o3dnt.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * (C) Copyright 2012
- * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-/*
- * Valid values for CONFIG_SYS_TEXT_BASE are:
- * 0xFC000000   boot low boot high (standard configuration)
- * 0x00100000   boot from RAM (for testing only)
- */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE   0xfc000000      /* Standard: boot low */
-#endif
-
-/* Board specific flash config */
-#define CONFIG_SYS_FLASH_BASE          0xfc000000
-#define CONFIG_SYS_FLASH_SIZE          0x04000000      /* maximum 64MB */
-/* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_SECT      512
-
-/*
- * Include common defines for all ifm boards
- */
-#include "o2dnt-common.h"
-
-/* Additional commands */
-#define CONFIG_CMD_REGINFO
-
-/*
- * GPIO configuration:
- * no CAN + no PCI
- */
-#define CONFIG_SYS_GPS_PORT_CONFIG     0x0000A000
-
-/* Other board specific configs */
-#define CONFIG_SYS_BOOTCS_CFG          0x00057d01
-#define CONFIG_SYS_RESET_ADDRESS       0xfc000000
-
-#define CONFIG_SYS_MEMTEST_START       0x00100000      /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END         0x03f00000      /* 1 - 63 MB in DRAM */
-
-#define CONFIG_BOARD_NAME              "o3dnt"
-#define CONFIG_BOARD_BOOTCMD           "run flash_self"
-#define CONFIG_BOARD_MEM_LIMIT         __stringify(62)
-#define BOARD_POST_CRC32_END           __stringify(0x01000000)
-
-#define CONFIG_EXTRA_ENV_SETTINGS                                      \
-       CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
-       CONFIG_IFM_DEFAULT_ENV_OLD                                      \
-       CONFIG_IFM_DEFAULT_ENV_NEW                                      \
-       "linbot=fc060000\0"                                             \
-       "lintop=fc15ffff\0"                                             \
-       "rambot=fc160000\0"                                             \
-       "ramtop=fc55ffff\0"                                             \
-       "jffbot=fc560000\0"                                             \
-       "jfftop=fce5ffff\0"                                             \
-       "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0"               \
-       "ubotop=fc03ffff\0"                                             \
-       "calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0"    \
-       "calbot=fce60000\0"                                             \
-       "caltop=fcffffff\0"                                             \
-       "progCal=tftp 200000 ${calname};erase ${calbot} ${caltop};"     \
-               "cp.b ${fileaddr} ${calbot} ${filesize}\0"              \
-       "kernel_addr=0xfc060000\0"                                      \
-       "ramdisk_addr=0xfc160000\0"                                     \
-       "master=mw f0000b00 0x0005A006;mw f0000b0c ${IOpin};"           \
-               "mw f0000b04 ${IOpin};mw f0000b10 0x20\0"