Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / o2mnt.h

diff --git a/include/configs/o2mnt.h b/include/configs/o2mnt.h
deleted file mode 100644 (file)
index eb63cb0..0000000
--- a/include/configs/o2mnt.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * (C) Copyright 2012
- * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-/*
- * Valid values for CONFIG_SYS_TEXT_BASE are:
- * 0xFF000000   boot low boot high (standard configuration)
- * 0x00100000   boot from RAM (for testing only)
- */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE   0xff000000      /* Standard: boot low */
-#endif
-
-/* Board specific flash config */
-#define CONFIG_SYS_FLASH_BASE          0xff000000
-#define CONFIG_SYS_FLASH_SIZE          0x01000000      /* maximum 16MB */
-/* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_SECT      128
-
-/*
- * Include common defines for all ifm boards
- */
-#include "o2dnt-common.h"
-
-/* GPIO configuration */
-#define CONFIG_SYS_GPS_PORT_CONFIG     0x00002004      /* no CAN */
-
-/* Other board specific configs */
-#define CONFIG_NETCONSOLE
-
-#define CONFIG_SYS_BOOTCS_CFG          0x00087801
-#define CONFIG_SYS_RESET_ADDRESS       0xff000000
-
-#define CONFIG_SYS_MEMTEST_START       0x00100000      /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END         0x03f00000      /* 1 - 63 MB in DRAM  */
-
-#define CONFIG_BOARD_NAME              "o2mnt"
-#define CONFIG_BOARD_BOOTCMD           "${newcmd}"
-#define CONFIG_BOARD_MEM_LIMIT         __stringify(62)
-#define BOARD_POST_CRC32_END           __stringify(0x01000000)
-
-#ifndef CONFIG_IFM_SENSOR_TYPE
-#define CONFIG_IFM_SENSOR_TYPE         "O2M110"
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS                                      \
-       CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
-       CONFIG_IFM_DEFAULT_ENV_OLD                                      \
-       CONFIG_IFM_DEFAULT_ENV_NEW                                      \
-       "linbot=ff060000\0"                                             \
-       "lintop=ff25ffff\0"                                             \
-       "rambot=ff260000\0"                                             \
-       "ramtop=ffc5ffff\0"                                             \
-       "jffbot=ffc60000\0"                                             \
-       "jfftop=ffffffff\0"                                             \
-       "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0"               \
-       "ubotop=ff03ffff\0"                                             \
-       "kernel_addr=0xff060000\0"                                      \
-       "ramdisk_addr=0xff260000\0"                                     \
-       "newcmd=run scrprot;run flash_ext2\0"                           \
-       "scrprot=protect on ${linbot} ${lintop};protect on ${rambot} "  \
-               "${ramtop}\0"                                           \
-       "flash_ext2=run ext2args addip addmem;bootm ${kernel_addr}\0"   \
-       "ext2args=setenv bootargs root=/dev/mtdblock3 ro "              \
-               "rootfstype=ext2\0"                                     \
-       "pwm=mw f0000674 0x10006;mw f0000678 0x30000;"                  \
-               "mw f0000678 0x30001;mw f0000670 0x3\0"                 \
-       "master=mw f0000b00 0x00052006;mw f0000b0c $(IOpin);"           \
-               "mw f0000b04 $(IOpin);mw f0000b10 0x24;run pwm\0"       \
-       "sensortyp="CONFIG_IFM_SENSOR_TYPE"\0"                          \
-       "srelease=0.00\0"