Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / o2d300.h

diff --git a/include/configs/o2d300.h b/include/configs/o2d300.h
deleted file mode 100644 (file)
index a8222d9..0000000
--- a/include/configs/o2d300.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * (C) Copyright 2012
- * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-/*
- * Valid values for CONFIG_SYS_TEXT_BASE are:
- * 0xFC000000   boot low boot high (standard configuration)
- * 0x00100000   boot from RAM (for testing only)
- */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE   0xfc000000      /* Standard: boot low */
-#endif
-
-/* Board specific flash config */
-#define CONFIG_SYS_FLASH_BASE          0xfc000000
-#define CONFIG_SYS_FLASH_SIZE          0x04000000      /* maximum 64MB */
-/* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_SECT      512
-
-/*
- * Include common defines for all ifm boards
- */
-#include "o2dnt-common.h"
-
-/*
- * GPIO configuration:
- * CS1 SDRAM activate + no CAN + no PCI
- */
-#define CONFIG_SYS_GPS_PORT_CONFIG      0x8000A004
-
-/* Other board specific configs */
-#define CONFIG_SYS_BOOTCS_CFG          0x00057d01
-#define CONFIG_SYS_RESET_ADDRESS       0xfc000000
-
-#define CONFIG_SYS_MEMTEST_START       0x00100000      /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END         0x07f00000      /* 1 - 127 MB in DRAM */
-
-/* Use redundant environment */
-#define CONFIG_ENV_ADDR_REDUND         (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND         (CONFIG_ENV_SIZE)
-
-#define CONFIG_BOARD_NAME              "o2d300"
-#define CONFIG_BOARD_BOOTCMD           "run dhcp_boot"
-#define CONFIG_BOARD_MEM_LIMIT         __stringify(126)
-#define BOARD_POST_CRC32_END           __stringify(0x02000000)
-
-#define CONFIG_EXTRA_ENV_SETTINGS                                      \
-       CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
-       CONFIG_IFM_DEFAULT_ENV_OLD                                      \
-       CONFIG_IFM_DEFAULT_ENV_NEW                                      \
-       "autoload=no\0"                                                 \
-       "dhcp_boot=run dhcpcmd;run flash_mtd\0"                         \
-       "flash_mtd=run mtd_args addip addmem;"                          \
-               "bootm ${kernel_addr}\0"                                \
-       "mtd_args=setenv bootargs root=/dev/mtdblock4 "                 \
-               "rw rootfstype=cramfs\0"                                \
-       "linbot=fc080000\0"                                             \
-       "lintop=fc17ffff\0"                                             \
-       "rambot=fc180000\0"                                             \
-       "ramtop=fc57ffff\0"                                             \
-       "jffbot=fc580000\0"                                             \
-       "jfftop=fd39ffff\0"                                             \
-       "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0"               \
-       "ubotop=fc03ffff\0"                                             \
-       "halname="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME"_halcon\0"      \
-       "halbot=fd3a0000\0"                                             \
-       "haltop=fdf9ffff\0"                                             \
-       "progHal=tftp 200000 ${halname};erase ${halbot} ${haltop};"     \
-               "cp.b ${fileaddr} ${halbot} ${filesize}\0"              \
-       "kernel_addr=0xfc060000\0"                                      \
-       "ramdisk_addr=0xfc160000\0"                                     \
-       "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};"           \
-               "mw f0000b04 ${IOpin};mw f0000b10 0x20\0"               \
-       "netretry=once\0"                                               \
-       "protcmd=protect on ${linbot} ${lintop};"                       \
-               "protect on ${rambot} ${ramtop}\0"                      \
-       "o2derror=def_env\0"                                            \
-       "sensorType=O2D300AA\0"