global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

[platform/kernel/u-boot.git] / include / configs / npi_imx6ull.h

diff --git a/include/configs/npi_imx6ull.h b/include/configs/npi_imx6ull.h
index 70e2898..080c659 100644 (file)
--- a/include/configs/npi_imx6ull.h
+++ b/include/configs/npi_imx6ull.h
@@ -10,69 +10,40 @@
 #include <linux/sizes.h>
 #include "mx6_common.h"
 
-/* SPL options */
-#include "imx6_spl.h"
-
-#define CONFIG_SYS_FSL_USDHC_NUM       1
+#define CFG_SYS_FSL_USDHC_NUM  1
 
 /* Console configs */
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
 /* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC2_BASE_ADDR
+#define CFG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
 
 #define CONFIG_NETMASK                 255.255.255.0
 
-#define CONFIG_SYS_HZ                  1000
-
 /* Physical Memory Map */
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
-#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
+#define CFG_SYS_SDRAM_BASE             PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 
-#define CONFIG_SYS_INIT_SP_OFFSET \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR        \
-       (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* environment settings */
-#if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_SYS_MMC_ENV_DEV         0
-#elif defined(CONFIG_ENV_IS_IN_NAND)
-#undef CONFIG_ENV_SIZE
-#define CONFIG_ENV_SECT_SIZE           (128 << 10)
-#define CONFIG_ENV_SIZE                        CONFIG_ENV_SECT_SIZE
-#endif
-
 /* NAND */
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_BASE           0x40000000
+#define CFG_SYS_NAND_BASE              0x40000000
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT        1
 
 #ifdef CONFIG_CMD_NET
-#define IMX_FEC_BASE                   ENET_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR         0x1
-#define CONFIG_FEC_XCV_TYPE            RMII
-#define CONFIG_ETHPRIME                        "eth0"
 #endif
 
-#define CONFIG_IMX_THERMAL
-
 #define CONFIG_FEC_ENET_DEV            1
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "console=ttymxc0,115200n8\0" \
        "image=zImage\0" \
        "fdtfile=imx6ull-seeed-npi-dev-board.dtb\0" \
-       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        "fdt_addr_r=0x82000000\0" \
        "kernel_addr_r=0x81000000\0" \
        "pxefile_addr_r=0x87100000\0" \
@@ -83,7 +54,7 @@
 
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
-       func(UBIFS, ubifs, 0) \
+       func(UBIFS, ubifs, 0, UBI, boot) \
        func(PXE, pxe, na) \
        func(DHCP, dhcp, na)