*/
#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */
-#define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51
-
#include <asm/arch/cpu.h> /* get chip and board defs */
#include <asm/arch/omap.h>
#include <asm/arch/mem.h>
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK >> 1)
-#define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */
-
-#define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */
-#define CONFIG_INITRD_TAG /* enable passing initrd */
-#define CONFIG_REVISION_TAG /* enable passing revision tag*/
-#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
-
-/*
- * Size of malloc() pool
- */
#define CONFIG_UBI_SIZE (512 << 10)
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
- (128 << 10))
/*
* Hardware drivers
"scriptboot=echo Running ${mmcscriptfile} from mmc " \
"${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
"kernboot=echo Booting ${mmckernfile} from mmc " \
- "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
+ "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} || " \
+ "bootz ${kernaddr}\0" \
"kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
- "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
+ "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr} || " \
+ "bootz ${kernaddr} ${initrdaddr}\0" \
"attachboot=echo Booting attached kernel image ...;" \
"setenv setup_omap_atag 1;" \
- "bootm ${attkernaddr};" \
+ "bootm ${attkernaddr} || bootz ${attkernaddr};" \
"setenv setup_omap_atag\0" \
- "trymmcscriptboot=if run switchmmc; then " \
- "if run scriptload; then " \
- "run scriptboot;" \
- "fi;" \
- "fi\0" \
- "trymmckernboot=if run switchmmc; then " \
- "if run kernload; then " \
- "run kernboot;" \
- "fi;" \
- "fi\0" \
- "trymmckerninitrdboot=if run switchmmc; then " \
- "if run initrdload; then " \
- "if run kernload; then " \
- "run kerninitrdboot;" \
- "fi;" \
- "fi; " \
- "fi\0" \
+ "trymmcscriptboot=run switchmmc && run scriptload && run scriptboot\0" \
+ "trymmckernboot=run switchmmc && run kernload && run kernboot\0" \
+ "trymmckerninitrdboot=run switchmmc && run initrdload && " \
+ "run kernload && run kerninitrdboot\0" \
"trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
- "setenv mmckernfile uImage; run trymmckernboot\0" \
+ "setenv mmckernfile uImage; run trymmckernboot;" \
+ "setenv mmckernfile zImage; run trymmckernboot\0" \
"trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
"setenv mmcpart 2; run trymmcpartboot;" \
"setenv mmcpart 3; run trymmcpartboot;" \
"fi\0" \
"emmcboot=setenv mmcnum 1; run trymmcboot\0" \
"sdboot=setenv mmcnum 0; run trymmcboot\0" \
- "preboot=setenv mmcnum 1; setenv mmcpart 1;" \
- "setenv mmcscriptfile bootmenu.scr;" \
- "if run switchmmc; then " \
- "setenv mmctype fat;" \
- "if run scriptload; then run scriptboot; else " \
- "setenv mmctype ext4;" \
- "if run scriptload; then run scriptboot; fi;" \
- "fi;" \
- "fi;" \
+ "trymmcbootmenu=setenv mmctype fat && run trymmcscriptboot || " \
+ "setenv mmctype ext4 && run trymmcscriptboot\0" \
+ "preboot=setenv mmcpart 1; setenv mmcscriptfile bootmenu.scr;" \
+ "setenv mmcnum 0 && run trymmcbootmenu || " \
+ "setenv mmcnum 1 && run trymmcbootmenu;" \
"if run slide; then true; else " \
"setenv bootmenu_delay 0;" \
"setenv bootdelay 0;" \
"echo run attachboot - Boot attached kernel image.;" \
"echo"
-#define CONFIG_BOOTCOMMAND \
- "run sdboot;" \
- "run emmcboot;" \
- "run attachboot;" \
- "echo"
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
-
/*
* OMAP3 has 12 GP timers, they can be driven by the system clock
* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).