+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011-2012
- * Pali Rohár <pali@kernel.org>
- *
- * (C) Copyright 2010
- * Alistair Buxton <a.j.buxton@gmail.com>
- *
- * Derived from Beagle Board code:
- * (C) Copyright 2006-2008
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Mohammed Khasim <x0khasim@ti.com>
- *
- * Configuration settings for the Nokia RX-51 aka N900.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-
-#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap.h>
-#include <asm/arch/mem.h>
-#include <linux/stringify.h>
-
-/* Clock Defines */
-#define V_OSCK 26000000 /* Clock output from T2 */
-#define V_SCLK (V_OSCK >> 1)
-
-#define CONFIG_UBI_SIZE (512 << 10)
-
-/*
- * Hardware drivers
- */
-
-/*
- * NS16550 Configuration
- */
-#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
-
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE
-#define CONFIG_USB_TTY
-#define CONFIG_USBD_VENDORID 0x0421
-#define CONFIG_USBD_PRODUCTID_CDCACM 0x01c8
-#define CONFIG_USBD_PRODUCTID_GSERIAL 0x01c8
-#define CONFIG_USBD_MANUFACTURER "Nokia"
-#define CONFIG_USBD_PRODUCT_NAME "N900 (U-Boot)"
-
-#define GPIO_SLIDE 71
-
-/*
- * Board ONENAND Info.
- */
-
-#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
-
-/* Environment information */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "usbtty=cdc_acm\0" \
- "stdin=usbtty,serial,keyboard\0" \
- "stdout=usbtty,serial,vidconsole\0" \
- "stderr=usbtty,serial,vidconsole\0" \
- "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
- "switchmmc=mmc dev ${mmcnum}\0" \
- "kernaddr=0x82008000\0" \
- "initrdaddr=0x84008000\0" \
- "scriptaddr=0x86008000\0" \
- "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
- "${loadaddr} ${mmcfile}\0" \
- "kernload=setenv loadaddr ${kernaddr};" \
- "setenv mmcfile ${mmckernfile};" \
- "run fileload\0" \
- "initrdload=setenv loadaddr ${initrdaddr};" \
- "setenv mmcfile ${mmcinitrdfile};" \
- "run fileload\0" \
- "scriptload=setenv loadaddr ${scriptaddr};" \
- "setenv mmcfile ${mmcscriptfile};" \
- "run fileload\0" \
- "scriptboot=echo Running ${mmcscriptfile} from mmc " \
- "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
- "kernboot=echo Booting ${mmckernfile} from mmc " \
- "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} || " \
- "bootz ${kernaddr}\0" \
- "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
- "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr} || " \
- "bootz ${kernaddr} ${initrdaddr}\0" \
- "attachboot=echo Booting attached kernel image ...;" \
- "setenv setup_omap_atag 1;" \
- "bootm ${attkernaddr} || bootz ${attkernaddr};" \
- "setenv setup_omap_atag\0" \
- "trymmcscriptboot=run switchmmc && run scriptload && run scriptboot\0" \
- "trymmckernboot=run switchmmc && run kernload && run kernboot\0" \
- "trymmckerninitrdboot=run switchmmc && run initrdload && " \
- "run kernload && run kerninitrdboot\0" \
- "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
- "setenv mmckernfile uImage; run trymmckernboot;" \
- "setenv mmckernfile zImage; run trymmckernboot\0" \
- "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
- "setenv mmcpart 2; run trymmcpartboot;" \
- "setenv mmcpart 3; run trymmcpartboot;" \
- "setenv mmcpart 4; run trymmcpartboot\0" \
- "trymmcboot=if run switchmmc; then " \
- "setenv mmctype fat;" \
- "run trymmcallpartboot;" \
- "setenv mmctype ext4;" \
- "run trymmcallpartboot;" \
- "fi\0" \
- "emmcboot=setenv mmcnum 1; run trymmcboot\0" \
- "sdboot=setenv mmcnum 0; run trymmcboot\0" \
- "trymmcbootmenu=setenv mmctype fat && run trymmcscriptboot || " \
- "setenv mmctype ext4 && run trymmcscriptboot\0" \
- "preboot=setenv mmcpart 1; setenv mmcscriptfile bootmenu.scr;" \
- "setenv mmcnum 0 && run trymmcbootmenu || " \
- "setenv mmcnum 1 && run trymmcbootmenu;" \
- "if run slide; then true; else " \
- "setenv bootmenu_delay 0;" \
- "setenv bootdelay 0;" \
- "fi\0" \
- "menucmd=bootmenu\0" \
- "bootmenu_0=Attached kernel=run attachboot\0" \
- "bootmenu_1=Internal eMMC=run emmcboot\0" \
- "bootmenu_2=External SD card=run sdboot\0" \
- "bootmenu_3=U-Boot boot order=boot\0" \
- "bootmenu_delay=30\0" \
- ""
-
-#define CONFIG_POSTBOOTMENU \
- "echo;" \
- "echo Extra commands:;" \
- "echo run sdboot - Boot from SD card slot.;" \
- "echo run emmcboot - Boot internal eMMC memory.;" \
- "echo run attachboot - Boot attached kernel image.;" \
- "echo"
-
-/*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
- * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
- * This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
-#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-
-/*
- * Physical Memory Map
- */
-#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
-
-/*
- * FLASH and environment organization
- */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE 0x800
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/*
- * Attached kernel image
- */
-
-#define SDRAM_SIZE 0x10000000 /* 256 MB */
-#define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
-
-#define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */
-#define KERNEL_OFFSET 0x40000 /* 256 kB */
-#define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET)
-#define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE)
-
-/* Reserve protected RAM for attached kernel */
-#define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1)
-
-#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff