env: Finish migration of common ENV options

[platform/kernel/u-boot.git] / include / configs / mx6sxsabresd.h

diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index 4c61999..704d9f3 100644 (file)
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Freescale i.MX6SX Sabresd board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -18,8 +17,6 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (3 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
@@ -59,9 +56,9 @@
        "videomode=video=ctfb:x:800,y:480,depth:24,pclk:29850,le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0\0" \
        "mmcdev=2\0" \
        "mmcpart=1\0" \
-       "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+       "finduuid=part uuid mmc 2:2 uuid\0" \
        "mmcargs=setenv bootargs console=${console},${baudrate} " \
-               "root=${mmcroot}\0" \
+               "root=PARTUUID=${uuid} rootwait rw\0" \
        "loadbootscript=" \
                "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
@@ -69,6 +66,7 @@
        "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
        "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
        "mmcboot=echo Booting from mmc ...; " \
+               "run finduuid; " \
                "run mmcargs; " \
                "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
                        "if run loadfdt; then " \
@@ -106,10 +104,13 @@
                        "fi; " \
                "else " \
                        "bootz; " \
-               "fi;\0"
+               "fi;\0" \
+       "findfdt="\
+               "if test test $board_rev = REVA ; then " \
+                       "setenv fdt_file imx6sx-sdb-reva.dtb; fi; " \
 
 #define CONFIG_BOOTCOMMAND \
-          "mmc dev ${mmcdev};" \
+          "run findfdt; " \
           "mmc dev ${mmcdev}; if mmc rescan; then " \
                   "if run loadbootscript; then " \
                           "run bootscript; " \
@@ -125,10 +126,7 @@
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 0x10000)
 
-#define CONFIG_STACKSIZE               SZ_128K
-
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
@@ -144,22 +142,14 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC4_BASE_ADDR
 
 /* I2C Configs */
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED             100000
 
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE100
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
-
 /* Network */
 #define CONFIG_FEC_MXC
-#define CONFIG_MII
 
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR          0x1
@@ -167,24 +157,16 @@
 #define CONFIG_FEC_XCV_TYPE             RGMII
 #define CONFIG_ETHPRIME                 "FEC"
 
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #endif
 
-#define CONFIG_CMD_PCI
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI
-#define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
 #define CONFIG_PCIE_IMX_PERST_GPIO     IMX_GPIO_NR(2, 0)
@@ -205,17 +187,11 @@
 #endif
 
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_VIDEO
 #ifdef CONFIG_VIDEO
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_MXS
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_LOGO
@@ -223,10 +199,6 @@
 #endif
 #endif
 
-#define CONFIG_ENV_OFFSET              (8 * SZ_64K)
-#define CONFIG_ENV_SIZE                        SZ_8K
-#define CONFIG_ENV_IS_IN_MMC
-
 #define CONFIG_SYS_FSL_USDHC_NUM       3
 #if defined(CONFIG_ENV_IS_IN_MMC)
 #define CONFIG_SYS_MMC_ENV_DEV         2  /*USDHC4*/