treewide: mem: Move mtest related defines to Kconfig

[platform/kernel/u-boot.git] / include / configs / mx35pdk.h

diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 0ec28ff..8f1213f 100644 (file)
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2010, Stefano Babic <sbabic@denx.de>
  *
@@ -6,8 +7,6 @@
  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
  *
  * Configuration for the MX35pdk Freescale board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -65,7 +64,6 @@
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX      1
 
 /*
  * Command definition
@@ -89,23 +87,17 @@
 #define IMX_FEC_BASE   FEC_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR 0x1F
 
-#define CONFIG_MII
-
 #define CONFIG_ARP_TIMEOUT     200UL
 
 /*
  * Miscellaneous configurable options
  */
 
-#define CONFIG_SYS_MEMTEST_START       0       /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END         0x10000
-
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
 /*
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS   2
 #define PHYS_SDRAM_1           CSD0_BASE_ADDR
 #define PHYS_SDRAM_1_SIZE      (128 * 1024 * 1024)
 #define PHYS_SDRAM_2           CSD1_BASE_ADDR
@@ -122,9 +114,6 @@
 /*
  * MTD Command for mtdparts
  */
-#define CONFIG_MTD_DEVICE
-#define CONFIG_FLASH_CFI_MTD
-#define CONFIG_MTD_PARTITIONS
 
 /*
  * FLASH and environment organization
@@ -136,30 +125,14 @@
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
 
-#define CONFIG_ENV_SECT_SIZE   (128 * 1024)
-#define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
-
 /* Address and size of Redundant Environment Sector    */
-#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE + \
-                               CONFIG_SYS_MONITOR_LEN)
-
-#if defined(CONFIG_FSL_ENV_IN_NAND)
-       #define CONFIG_ENV_OFFSET       (1024 * 1024)
-#endif
 
 /*
  * CFI FLASH driver setup
  */
-#define CONFIG_SYS_FLASH_CFI           /* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER
 
 /* A non-standard buffered write algorithm */
 #define CONFIG_FLASH_SPANSION_S29WS_N
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE      /* faster */
-#define CONFIG_SYS_FLASH_PROTECTION    /* Use hardware sector protection */
 
 /*
  * NAND FLASH driver setup
@@ -181,7 +154,6 @@
 #define CONFIG_MXC_USB_PORTSC  (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI)
 
 /* mmc driver */
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_ESDHC_NUM       1
 
@@ -209,9 +181,9 @@
        "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
        "loadaddr=80800000\0"                                           \
        "kernel_addr_r=80800000\0"                                      \
-       "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
-       "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
-       "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"      \
+       "hostname=" CONFIG_HOSTNAME "\0"                        \
+       "bootfile=" CONFIG_HOSTNAME "/uImage\0"         \
+       "ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0"   \
        "flash_self=run ramargs addip addtty addmtd addmisc;"           \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
@@ -221,7 +193,7 @@
                "bootm ${kernel_addr_r}\0"                              \
        "net_self_load=tftp ${kernel_addr_r} ${bootfile};"              \
                "tftp ${ramdisk_addr_r} ${ramdisk_file};\0"             \
-       "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
+       "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"               \
        "load=tftp ${loadaddr} ${u-boot}\0"                             \
        "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"         \
        "update=protect off ${uboot_addr} +80000;"                      \