SPDX: Convert all of our single license tags to Linux Kernel style

[platform/kernel/u-boot.git] / include / configs / mx28evk.h

diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 10867a7..f373b1e 100644 (file)
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2011 Freescale Semiconductor, Inc.
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
@@ -5,36 +6,13 @@
  * Based on m28evk.h:
  * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
  * on behalf of DENX Software Engineering GmbH
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 #ifndef __CONFIGS_MX28EVK_H__
 #define __CONFIGS_MX28EVK_H__
 
 /* System configurations */
-#define CONFIG_MX28                            /* i.MX28 SoC */
 #define CONFIG_MACH_TYPE       MACH_TYPE_MX28EVK
 
-/* U-Boot Commands */
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_VIDEO
-
 /* Memory configuration */
 #define CONFIG_NR_DRAM_BANKS           1               /* 1 bank of DRAM */
 #define PHYS_SDRAM_1                   0x40000000      /* Base address */
@@ -79,28 +57,14 @@
 
 /* UBI and NAND partitioning */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT                 "nand0=gpmi-nand"
-#define MTDPARTS_DEFAULT                       \
-       "mtdparts=gpmi-nand:"                   \
-               "3m(bootloader)ro,"             \
-               "512k(environment),"            \
-               "512k(redundant-environment),"  \
-               "4m(kernel),"                   \
-               "512k(fdt),"                    \
-               "8m(ramdisk),"                  \
-               "-(filesystem)"
 #endif
 
 /* FEC Ethernet on SoC */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
+#define CONFIG_FEC_MXC_MDIO_BASE MXS_ENET0_BASE
 #define CONFIG_MX28_FEC_MAC_IN_OCOTP
 #endif
 
@@ -113,10 +77,6 @@
 #ifdef CONFIG_CMD_USB
 #define CONFIG_EHCI_MXS_PORT1
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1
-#define        CONFIG_USB_STORAGE
-#define        CONFIG_USB_HOST_ETHER
-#define        CONFIG_USB_ETHER_ASIX
-#define        CONFIG_USB_ETHER_SMSC95XX
 #endif
 
 /* SPI */
@@ -129,7 +89,6 @@
 #define CONFIG_SF_DEFAULT_BUS          2
 #define CONFIG_SF_DEFAULT_CS           0
 /* this may vary and depends on the installed chip */
-#define CONFIG_SPI_FLASH_SST
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
 #define CONFIG_SF_DEFAULT_SPEED                24000000
 #endif
@@ -140,7 +99,6 @@
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_SPLASH_SCREEN
-#define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_GZIP
@@ -148,7 +106,6 @@
 #endif
 
 /* Boot Linux */
-#define CONFIG_BOOTDELAY       1
 #define CONFIG_BOOTFILE                "uImage"
 #define CONFIG_LOADADDR                0x42000000
 #define CONFIG_SYS_LOAD_ADDR   CONFIG_LOADADDR