Convert CONFIG_SYS_LOAD_ADDR to Kconfig

[platform/kernel/u-boot.git] / include / configs / mx23evk.h

diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h
index 1b40a36..d82dbc1 100644 (file)
--- a/include/configs/mx23evk.h
+++ b/include/configs/mx23evk.h
@@ -1,76 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Freescale i.MX23 EVK board config
  *
  * Copyright (C) 2013 Otavio Salvador <otavio@ossystems.com.br>
  * on behalf of O.S. Systems Software LTDA.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 #ifndef __CONFIGS_MX23EVK_H__
 #define __CONFIGS_MX23EVK_H__
 
 /* System configurations */
-#define CONFIG_MX23                            /* i.MX23 SoC */
 #define CONFIG_MACH_TYPE       MACH_TYPE_MX23EVK
 
 /* U-Boot Commands */
-#define CONFIG_SYS_NO_FLASH
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_VIDEO
 
 /* Memory configuration */
-#define CONFIG_NR_DRAM_BANKS           1               /* 1 bank of DRAM */
 #define PHYS_SDRAM_1                   0x40000000      /* Base address */
 #define PHYS_SDRAM_1_SIZE              0x08000000      /* Max 128 MB RAM */
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
 
 /* Environment */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_IS_IN_MMC
 
 /* Environment is in MMC */
-#if defined(CONFIG_CMD_MMC) && defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_ENV_OFFSET      (256 * 1024)
-#define CONFIG_ENV_SIZE                (16 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#endif
 
 /* USB */
 #ifdef CONFIG_CMD_USB
 #define CONFIG_EHCI_MXS_PORT0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#define CONFIG_USB_STORAGE
 #endif
 
 /* Framebuffer support */
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_CMD_BMP
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_VIDEO_BMP_GZIP
 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10)
 #endif
 
 /* Boot Linux */
-#define CONFIG_BOOTDELAY       1
 #define CONFIG_BOOTFILE                "uImage"
-#define CONFIG_LOADADDR                0x42000000
-#define CONFIG_SYS_LOAD_ADDR   CONFIG_LOADADDR
 
 /* Extra Environments */
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -84,7 +49,7 @@
                "fi ; " \
                "fi\0" \
        "script=boot.scr\0"     \
-       "uimage=uImage\0" \
+       "image=zImage\0" \
        "console=ttyAMA0\0" \
        "fdt_file=imx23-evk.dtb\0" \
        "fdt_addr=0x41000000\0" \
@@ -98,22 +63,22 @@
                "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
        "bootscript=echo Running bootscript from mmc ...; "     \
                "source\0" \
-       "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+       "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
        "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
        "mmcboot=echo Booting from mmc ...; " \
                "run mmcargs; " \
                "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
                        "if run loadfdt; then " \
-                               "bootm ${loadaddr} - ${fdt_addr}; " \
+                               "bootz ${loadaddr} - ${fdt_addr}; " \
                        "else " \
                                "if test ${boot_fdt} = try; then " \
-                                       "bootm; " \
+                                       "bootz; " \
                                "else " \
                                        "echo WARN: Cannot load the DT; " \
                                "fi; " \
                        "fi; " \
                "else " \
-                       "bootm; " \
+                       "bootz; " \
                "fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
@@ -121,7 +86,7 @@
                "if run loadbootscript; then " \
                        "run bootscript; " \
                "else " \
-                       "if run loaduimage; then " \
+                       "if run loadimage; then " \
                                "run mmcboot; " \
                        "else " \
                                "echo ERR: Fail to boot from MMC; " \