Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / ms7720se.h

diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h
deleted file mode 100644 (file)
index b159c10..0000000
--- a/include/configs/ms7720se.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Hitachi Solution Engine 7720
- *
- * Copyright (C) 2007 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- */
-
-#ifndef __MS7720SE_H
-#define __MS7720SE_H
-
-#define CONFIG_CPU_SH7720      1
-
-#define CONFIG_BOOTFILE                "/boot/zImage"
-#define CONFIG_LOADADDR                0x8E000000
-
-#define CONFIG_DISPLAY_BOARDINFO
-#undef  CONFIG_SHOW_BOOT_PROGRESS
-
-/* MEMORY */
-#define MS7720SE_SDRAM_BASE            0x8C000000
-#define MS7720SE_FLASH_BASE_1          0xA0000000
-#define MS7720SE_FLASH_BANK_SIZE       (8 * 1024 * 1024)
-
-#define CONFIG_SYS_PBSIZE      256     /* Buffer size for Console output */
-/* List of legal baudrate settings for this board */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 115200 }
-
-/* SCIF */
-#define CONFIG_CONS_SCIF0      1
-
-#define CONFIG_SYS_MEMTEST_START       MS7720SE_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
-
-#define CONFIG_SYS_SDRAM_BASE          MS7720SE_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_SIZE          (64 * 1024 * 1024)
-
-#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
-#define CONFIG_SYS_MONITOR_BASE        MS7720SE_FLASH_BASE_1
-#define CONFIG_SYS_MONITOR_LEN         (128 * 1024)
-#define CONFIG_SYS_MALLOC_LEN          (256 * 1024)
-#define CONFIG_SYS_BOOTMAPSZ           (8 * 1024 * 1024)
-
-/* FLASH */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#undef  CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_SYS_FLASH_EMPTY_INFO    /* print 'E' for empty sector on flinfo */
-
-#define CONFIG_SYS_FLASH_BASE          MS7720SE_FLASH_BASE_1
-
-#define CONFIG_SYS_MAX_FLASH_SECT      150
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
-#define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE }
-
-#define CONFIG_ENV_SECT_SIZE   (64 * 1024)
-#define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_FLASH_ERASE_TOUT    120000
-#define CONFIG_SYS_FLASH_WRITE_TOUT    500
-
-/* Board Clock */
-#define CONFIG_SYS_CLK_FREQ    33333333
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
-
-/* PCMCIA */
-#define CONFIG_IDE_PCMCIA      1
-#define CONFIG_MARUBUN_PCCARD  1
-#define CONFIG_PCMCIA_SLOT_A   1
-#define CONFIG_SYS_IDE_MAXDEVICE       1
-#define CONFIG_SYS_MARUBUN_MRSHPC      0xb83fffe0
-#define CONFIG_SYS_MARUBUN_MW1         0xb8400000
-#define CONFIG_SYS_MARUBUN_MW2         0xb8500000
-#define CONFIG_SYS_MARUBUN_IO          0xb8600000
-
-#define CONFIG_SYS_PIO_MODE            1
-#define CONFIG_SYS_IDE_MAXBUS          1
-#define CONFIG_SYS_ATA_BASE_ADDR       CONFIG_SYS_MARUBUN_IO   /* base address */
-#define CONFIG_SYS_ATA_IDE0_OFFSET     0x01F0          /* ide0 offste */
-#define CONFIG_SYS_ATA_DATA_OFFSET     0               /* data reg offset */
-#define CONFIG_SYS_ATA_REG_OFFSET      0               /* reg offset */
-#define CONFIG_SYS_ATA_ALT_OFFSET      0x200           /* alternate register offset */
-#define CONFIG_IDE_SWAP_IO
-
-#endif /* __MS7720SE_H */