Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / microblaze-generic.h

diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index ca749ed..6740ab2 100644 (file)
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -11,47 +11,11 @@
 /* Microblaze is microblaze_0 */
 #define XILINX_FSL_NUMBER      3
 
-/* MicroBlaze CPU */
-#define        MICROBLAZE_V5           1
-
-#define CONFIG_SYS_BOOTM_LEN   (64 * 1024 * 1024)
-
 /* uart */
 /* The following table includes the supported baudrates */
-# define CONFIG_SYS_BAUDRATE_TABLE \
+# define CFG_SYS_BAUDRATE_TABLE \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
-/* Stack location before relocation */
-#define CONFIG_SYS_INIT_SP_OFFSET      (CONFIG_SYS_TEXT_BASE - \
-                                        CONFIG_SYS_MALLOC_F_LEN)
-
-#ifdef CONFIG_CFI_FLASH
-/* ?empty sector */
-# define CONFIG_SYS_FLASH_EMPTY_INFO   1
-/* max number of memory banks */
-/* max number of sectors on one chip */
-# define CONFIG_SYS_MAX_FLASH_SECT     2048
-#endif
-
-#define CONFIG_ICACHE
-#define CONFIG_DCACHE
-
-#ifndef XILINX_DCACHE_BYTE_SIZE
-#define XILINX_DCACHE_BYTE_SIZE        32768
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/* size of console buffer */
-#define        CONFIG_SYS_CBSIZE       512
-/* max number of command args */
-#define        CONFIG_SYS_MAXARGS      15
-
-#define        CONFIG_HOSTNAME         "microblaze-generic"
-
 /* architecture dependent code */
 #if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
 #define BOOT_TARGET_DEVICES_PXE(func)  func(PXE, pxe, na)
@@ -112,8 +76,8 @@
 
 #include <config_distro_bootcmd.h>
 
-#ifndef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#ifndef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
        "unlock=yes\0"\
        "nor0=flash-0\0"\
        "mtdparts=mtdparts=flash-0:"\
@@ -127,36 +91,8 @@
        BOOTENV
 #endif
 
-#if defined(CONFIG_XILINX_AXIEMAC)
-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN       1
-#endif
-
 /* SPL part */
 
-#define CONFIG_SYS_UBOOT_BASE          CONFIG_SYS_TEXT_BASE
-
-/* for booting directly linux */
-#define CONFIG_SYS_FDT_BASE            (CONFIG_SYS_TEXT_BASE + \
-                                       0x40000)
-
-#define CONFIG_SYS_SPL_ARGS_ADDR       (CONFIG_SYS_TEXT_BASE + \
-                                        0x1000000)
-
-/* SP location before relocation, must use scratch RAM */
-/* BRAM start */
-#define CONFIG_SYS_INIT_RAM_ADDR       0x0
-/* BRAM size - will be generated */
-#define CONFIG_SYS_INIT_RAM_SIZE       0x100000
-
-# define CONFIG_SPL_STACK_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
-                                        CONFIG_SYS_INIT_RAM_SIZE)
-
-/* Just for sure that there is a space for stack */
-#define CONFIG_SPL_STACK_SIZE          0x100
-
-#define CONFIG_SPL_MAX_FOOTPRINT       (CONFIG_SYS_INIT_RAM_SIZE - \
-                                        CONFIG_SYS_INIT_RAM_ADDR - \
-                                        CONFIG_SYS_MALLOC_F_LEN - \
-                                        CONFIG_SPL_STACK_SIZE)
+#define CFG_SYS_UBOOT_BASE             CONFIG_TEXT_BASE
 
 #endif /* __CONFIG_H */