#ifndef __CONFIG_H
#define __CONFIG_H
-#include "../board/xilinx/microblaze-generic/xparameters.h"
-
-/* MicroBlaze CPU */
-#define MICROBLAZE_V5 1
-
-#define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024)
-
-/* linear and spi flash memory */
-#ifdef XILINX_FLASH_START
-#define FLASH
-#undef SPIFLASH
-#undef RAMENV /* hold environment in flash */
-#else
-#undef FLASH
-#undef SPIFLASH
-#define RAMENV /* hold environment in RAM */
-#endif
+/* Microblaze is microblaze_0 */
+#define XILINX_FSL_NUMBER 3
/* uart */
/* The following table includes the supported baudrates */
-# define CONFIG_SYS_BAUDRATE_TABLE \
+# define CFG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-/* setting reset address */
-/*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/
-
-#define CONFIG_SYS_MALLOC_LEN 0xC0000
-
-/* Stack location before relocation */
-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_TEXT_BASE - \
- CONFIG_SYS_MALLOC_F_LEN)
-
-/*
- * CFI flash memory layout - Example
- * CONFIG_SYS_FLASH_BASE = 0x2200_0000;
- * CONFIG_SYS_FLASH_SIZE = 0x0080_0000; 8MB
- *
- * SECT_SIZE = 0x20000; 128kB is one sector
- * CONFIG_ENV_SIZE = SECT_SIZE; 128kB environment store
- *
- * 0x2200_0000 CONFIG_SYS_FLASH_BASE
- * FREE 256kB
- * 0x2204_0000 CONFIG_ENV_ADDR
- * ENV_AREA 128kB
- * 0x2206_0000
- * FREE
- * 0x2280_0000 CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE
- *
- */
-
-#ifdef FLASH
-# define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START
-# define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE
-/* ?empty sector */
-# define CONFIG_SYS_FLASH_EMPTY_INFO 1
-/* max number of memory banks */
-# define CONFIG_SYS_MAX_FLASH_BANKS 1
-/* max number of sectors on one chip */
-# define CONFIG_SYS_MAX_FLASH_SECT 512
-/* hardware flash protection */
-/* use buffered writes (20x faster) */
-# ifdef RAMENV
-# else /* FLASH && !RAMENV */
-/* 128K(one sector) for env */
-# endif /* FLASH && !RAMBOOT */
-#else /* !FLASH */
-
-#ifdef SPIFLASH
-# ifdef RAMENV
-# else /* SPIFLASH && !RAMENV */
-/* 128K(two sectors) for env */
-/* Warning: adjust the offset in respect of other flash content and size */
-# endif /* SPIFLASH && !RAMBOOT */
-#else /* !SPIFLASH */
-
-/* ENV in RAM */
-#endif /* !SPIFLASH */
-#endif /* !FLASH */
-
-#define XILINX_USE_ICACHE 1
-#define XILINX_USE_DCACHE 1
-
-#if defined(XILINX_USE_ICACHE)
-# define CONFIG_ICACHE
+/* architecture dependent code */
+#if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
+#define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
#else
-# undef CONFIG_ICACHE
+#define BOOT_TARGET_DEVICES_PXE(func)
#endif
-#if defined(XILINX_USE_DCACHE)
-# define CONFIG_DCACHE
+#if defined(CONFIG_CMD_DHCP)
+#define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
#else
-# undef CONFIG_DCACHE
-#endif
-
-#ifndef XILINX_DCACHE_BYTE_SIZE
-#define XILINX_DCACHE_BYTE_SIZE 32768
+#define BOOT_TARGET_DEVICES_DHCP(func)
#endif
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#if defined(CONFIG_MTD_PARTITIONS)
-/* MTD partitions */
-
-/* default mtd partition table */
+#if defined(CONFIG_SPI_FLASH)
+# define BOOT_TARGET_DEVICES_QSPI(func) func(QSPI, qspi, na)
+#else
+# define BOOT_TARGET_DEVICES_QSPI(func)
#endif
-/* size of console buffer */
-#define CONFIG_SYS_CBSIZE 512
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS 15
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR 0
-
-#define CONFIG_HOSTNAME "microblaze-generic"
-#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
-
-/* architecture dependent code */
-#define CONFIG_SYS_USR_EXCEP /* user exception */
-
-#ifndef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" \
- "nor0=flash-0\0"\
- "mtdparts=mtdparts=flash-0:"\
- "256k(u-boot),256k(env),3m(kernel),"\
- "1m(romfs),1m(cramfs),-(jffs2)\0"\
- "nc=setenv stdout nc;"\
- "setenv stdin nc\0" \
- "serial=setenv stdout serial;"\
- "setenv stdin serial\0"
+#if defined(CONFIG_MTD_NOR_FLASH)
+# define BOOT_TARGET_DEVICES_NOR(func) func(NOR, nor, na)
+#else
+# define BOOT_TARGET_DEVICES_NOR(func)
#endif
-#if defined(CONFIG_XILINX_AXIEMAC)
-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1
+#define BOOTENV_DEV_NOR(devtypeu, devtypel, instance) \
+ "bootcmd_nor=cp.b ${script_offset_nor} ${scriptaddr} ${script_size_f} && " \
+ "echo NOR: Trying to boot script at ${scriptaddr} && " \
+ "source ${scriptaddr}; echo NOR: SCRIPT FAILED: continuing...;\0"
+
+#define BOOTENV_DEV_NAME_NOR(devtypeu, devtypel, instance) \
+ "nor "
+
+#define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \
+ "bootcmd_qspi=sf probe 0 0 0 && " \
+ "sf read ${scriptaddr} ${script_offset_f} ${script_size_f} && " \
+ "echo QSPI: Trying to boot script at ${scriptaddr} && " \
+ "source ${scriptaddr}; echo QSPI: SCRIPT FAILED: continuing...;\0"
+
+#define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \
+ "qspi "
+
+#define BOOT_TARGET_DEVICES_JTAG(func) func(JTAG, jtag, na)
+
+#define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \
+ "bootcmd_jtag=echo JTAG: Trying to boot script at ${scriptaddr} && " \
+ "source ${scriptaddr}; echo JTAG: SCRIPT FAILED: continuing...;\0"
+
+#define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \
+ "jtag "
+
+#define BOOT_TARGET_DEVICES(func) \
+ BOOT_TARGET_DEVICES_JTAG(func) \
+ BOOT_TARGET_DEVICES_QSPI(func) \
+ BOOT_TARGET_DEVICES_NOR(func) \
+ BOOT_TARGET_DEVICES_DHCP(func) \
+ BOOT_TARGET_DEVICES_PXE(func)
+
+#include <config_distro_bootcmd.h>
+
+#ifndef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
+ "unlock=yes\0"\
+ "nor0=flash-0\0"\
+ "mtdparts=mtdparts=flash-0:"\
+ "256k(u-boot),256k(env),3m(kernel),"\
+ "1m(romfs),1m(cramfs),-(jffs2)\0"\
+ "nc=setenv stdout nc;"\
+ "setenv stdin nc\0" \
+ "serial=setenv stdout serial;"\
+ "setenv stdin serial\0"\
+ "script_size_f=0x40000\0"\
+ BOOTENV
#endif
/* SPL part */
-#ifdef CONFIG_SYS_FLASH_BASE
-# define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE
-#endif
-
-/* for booting directly linux */
-
-#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \
- 0x40000)
-#define CONFIG_SYS_FDT_SIZE (16 << 10)
-#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_TEXT_BASE + \
- 0x1000000)
-
-/* SP location before relocation, must use scratch RAM */
-/* BRAM start */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x0
-/* BRAM size - will be generated */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x100000
-
-# define CONFIG_SPL_STACK_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- CONFIG_SYS_MALLOC_F_LEN)
-
-/* Just for sure that there is a space for stack */
-#define CONFIG_SPL_STACK_SIZE 0x100
-
-#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \
- CONFIG_SYS_INIT_RAM_ADDR - \
- CONFIG_SYS_MALLOC_F_LEN - \
- CONFIG_SPL_STACK_SIZE)
+#define CFG_SYS_UBOOT_BASE CONFIG_TEXT_BASE
#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff