global: Move remaining CONFIG_SYS_* to CFG_SYS_*

[platform/kernel/u-boot.git] / include / configs / lx2160a_common.h

diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index b754373..bbee9df 100644 (file)
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -10,19 +10,15 @@
 #include <asm/arch/config.h>
 #include <asm/arch/soc.h>
 
-#define CONFIG_FSL_MEMAC
-
-#define CONFIG_SYS_FLASH_BASE          0x20000000
+#define CFG_SYS_FLASH_BASE             0x20000000
 
 /* DDR */
-#define CONFIG_SYS_FSL_DDR_INTLV_256B  /* force 256 byte interleaving */
 #define CONFIG_VERY_BIG_RAM
-#define CONFIG_SYS_DDR_SDRAM_BASE              0x80000000UL
-#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY      0
-#define CONFIG_SYS_DDR_BLOCK2_BASE             0x2080000000ULL
-#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS      2
-#define CONFIG_SYS_SDRAM_SIZE                  0x200000000UL
-#define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
+#define CFG_SYS_DDR_SDRAM_BASE         0x80000000UL
+#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
+#define CFG_SYS_DDR_BLOCK2_BASE                0x2080000000ULL
+#define CFG_SYS_SDRAM_SIZE                     0x200000000UL
+#define CFG_SYS_SDRAM_BASE             CFG_SYS_DDR_SDRAM_BASE
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #define SPD_EEPROM_ADDRESS1            0x51
 #define SPD_EEPROM_ADDRESS2            0x52
@@ -31,7 +27,6 @@
 #define SPD_EEPROM_ADDRESS5            0x55
 #define SPD_EEPROM_ADDRESS6            0x56
 #define SPD_EEPROM_ADDRESS             SPD_EEPROM_ADDRESS1
-#define CONFIG_SYS_MONITOR_LEN         (936 * 1024)
 
 /* Miscellaneous configurable options */
 
@@ -47,22 +42,22 @@
 
 /* Serial Port */
 #define CONFIG_PL011_CLOCK             (get_bus_freq(0) / 4)
-#define CONFIG_SYS_SERIAL0             0x21c0000
-#define CONFIG_SYS_SERIAL1             0x21d0000
-#define CONFIG_SYS_SERIAL2             0x21e0000
-#define CONFIG_SYS_SERIAL3             0x21f0000
+#define CFG_SYS_SERIAL0                0x21c0000
+#define CFG_SYS_SERIAL1                0x21d0000
+#define CFG_SYS_SERIAL2                0x21e0000
+#define CFG_SYS_SERIAL3                0x21f0000
 /*below might needs to be removed*/
-#define CONFIG_PL01x_PORTS             {(void *)CONFIG_SYS_SERIAL0, \
-                                       (void *)CONFIG_SYS_SERIAL1, \
-                                       (void *)CONFIG_SYS_SERIAL2, \
-                                       (void *)CONFIG_SYS_SERIAL3 }
+#define CONFIG_PL01x_PORTS             {(void *)CFG_SYS_SERIAL0, \
+                                       (void *)CFG_SYS_SERIAL1, \
+                                       (void *)CFG_SYS_SERIAL2, \
+                                       (void *)CFG_SYS_SERIAL3 }
 
 /* MC firmware */
-#define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH                0x20000
-#define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET       0x00F00000
-#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH                0x20000
-#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET       0x00F20000
-#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS       5000
+#define CFG_SYS_LS_MC_DPC_MAX_LENGTH           0x20000
+#define CFG_SYS_LS_MC_DRAM_DPC_OFFSET  0x00F00000
+#define CFG_SYS_LS_MC_DPL_MAX_LENGTH           0x20000
+#define CFG_SYS_LS_MC_DRAM_DPL_OFFSET  0x00F20000
+#define CFG_SYS_LS_MC_BOOT_TIMEOUT_MS  5000
 
 /*
  * Carve out a DDR region which will not be used by u-boot/Linux
@@ -71,7 +66,7 @@
  * 512MB aligned, so the min size to hide is 512MB.
  */
 #ifdef CONFIG_FSL_MC_ENET
-#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE   (256UL * 1024 * 1024)
+#define CFG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE      (256UL * 1024 * 1024)
 #endif
 
 /* I2C bus multiplexer */
@@ -80,14 +75,10 @@
 
 /* RTC */
 #define RTC
-#define CONFIG_SYS_I2C_RTC_ADDR                0x51  /* Channel 3*/
-
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM              0
+#define CFG_SYS_I2C_RTC_ADDR           0x51  /* Channel 3*/
 
 /* Qixis */
-#define CONFIG_SYS_I2C_FPGA_ADDR               0x66
+#define CFG_SYS_I2C_FPGA_ADDR          0x66
 
 /* USB */