Merge with /home/stefan/git/u-boot/u-boot-ppc4xx

[platform/kernel/u-boot.git] / include / configs / lwmon5.h

diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 14a200d..cf8ff45 100644 (file)
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -36,7 +36,6 @@
 #define CONFIG_BOARD_EARLY_INIT_F 1    /* Call board_early_init_f      */
 #define CONFIG_BOARD_POSTCLK_INIT 1    /* Call board_postclk_init      */
 #define CONFIG_MISC_INIT_R     1       /* Call misc_init_r             */
-#define CONFIG_ADD_RAM_INFO    1       /* Print additional info        */
 
 /*-----------------------------------------------------------------------
  * Base addresses -- Note these are effective addresses where the
@@ -138,10 +137,25 @@
 #define CONFIG_DDR_DATA_EYE    1               /* use DDR2 optimization        */
 #if 0 /* test-only: disable ECC for now */
 #define CONFIG_DDR_ECC         1               /* enable ECC                   */
+#define CFG_POST_ECC_ON                CFG_POST_ECC
+#else
+#define CFG_POST_ECC_ON                0
+#endif
 
 /* POST support */
-#define CONFIG_POST            (CFG_POST_ECC)
-#endif
+#define CONFIG_POST            (CFG_POST_MEMORY   | \
+                                CFG_POST_ECC_ON   | \
+                                CFG_POST_CPU      | \
+                                CFG_POST_UART     | \
+                                CFG_POST_I2C      | \
+                                CFG_POST_CACHE    | \
+                                CFG_POST_FPU      | \
+                                CFG_POST_ETHER    | \
+                                CFG_POST_SPR)
+
+#define CFG_POST_CACHE_ADDR    0x10000000      /* free virtual address         */
+#define CONFIG_LOGBUFFER
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 
 /*-----------------------------------------------------------------------
  * I2C
@@ -177,6 +191,7 @@
        "hostname=lwmon5\0"                                             \
        "netdev=eth0\0"                                                 \
        "unlock=yes\0"                                                  \
+       "logversion=2\0"                                                \
        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
                "nfsroot=${serverip}:${rootpath}\0"                     \
        "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
@@ -234,9 +249,6 @@
 /* Comment this out to enable USB 1.1 device */
 #define USB_2_0_DEVICE
 
-#define CMD_USB                        CFG_CMD_USB
-#else
-#define CMD_USB                        0       /* no USB on 440GRx             */
 #endif /* CONFIG_440EPX */
 
 /* Partitions */
@@ -244,36 +256,49 @@
 #define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 
-#define CONFIG_COMMANDS       (CONFIG_CMD_DFL  |       \
-                              CFG_CMD_ASKENV   |       \
-                              CFG_CMD_DATE     |       \
-                              CFG_CMD_DHCP     |       \
-                              CFG_CMD_DIAG     |       \
-                              CFG_CMD_EEPROM   |       \
-                              CFG_CMD_ELF      |       \
-                              CFG_CMD_FAT      |       \
-                              CFG_CMD_I2C      |       \
-                              CFG_CMD_IRQ      |       \
-                              CFG_CMD_MII      |       \
-                              CFG_CMD_NET      |       \
-                              CFG_CMD_NFS      |       \
-                              CFG_CMD_PCI      |       \
-                              CFG_CMD_PING     |       \
-                              CFG_CMD_REGINFO  |       \
-                              CFG_CMD_SDRAM    |       \
-                              CMD_USB)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
 
-#define CONFIG_SUPPORT_VFAT
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOG
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#ifdef CONFIG_440EPX
+#define CONFIG_CMD_USB
+#endif
 
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
+#define CONFIG_SUPPORT_VFAT
+
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size      */
@@ -458,7 +483,7 @@
  *----------------------------------------------------------------------*/
 #define CFG_DCACHE_SIZE                (32<<10)  /* For AMCC 440 CPUs                  */
 #define CFG_CACHELINE_SIZE     32            /* ...                                */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5             /* log base 2 of the above value  */
 #endif
 
@@ -470,7 +495,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
 #define BOOTFLAG_WARM  0x02            /* Software reboot                      */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2           /* which serial port to use */
 #endif