+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (c) 2012 Michael Walle
* Michael Walle <michael@walle.cc>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _CONFIG_LSXL_H
#define _CONFIG_LSXL_H
/*
- * Version number information
- */
-#if defined(CONFIG_LSCHLV2)
-#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
-#define CONFIG_MACH_TYPE 3006
-#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
-#elif defined(CONFIG_LSXHL)
-#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
-#define CONFIG_MACH_TYPE 2663
-/* CONFIG_SYS_TCLK is 200000000 by default */
-#else
-#error "unknown board"
-#endif
-
-/*
* General configuration options
*/
-#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
-#define CONFIG_KW88F6281 /* SOC Name */
-
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
-#define CONFIG_MISC_INIT_R
-#define CONFIG_SHOW_BOOT_PROGRESS
-
-#define CONFIG_KIRKWOOD_GPIO
-/*
- * Commands configuration
- */
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
#include "mv-common.h"
/* loading initramfs images without uimage header */
-/* ST M25P40 */
-#undef CONFIG_ENV_SPI_MAX_HZ
-#define CONFIG_ENV_SPI_MAX_HZ 25000000
-#undef CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_SF_DEFAULT_SPEED 25000000
-
/*
* Environment variables configurations
*/
-#ifdef CONFIG_SPI_FLASH
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 8
-#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */
-#endif
-
-#define CONFIG_ENV_SIZE 0x10000 /* 64k */
-#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */
/*
* Default environment variables
*/
-#define CONFIG_LOADADDR 0x00800000
-
-#if defined(CONFIG_LSXHL)
-#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
-#elif defined(CONFIG_LSCHLV2)
-#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
-#else
-#error "Unsupported board"
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootsource=legacy\0" \
"hdpart=0:1\0" \
- "kernel_addr=0x00800000\0" \
- "ramdisk_addr=0x01000000\0" \
- "fdt_addr=0x00ff0000\0" \
- "bootcmd_legacy=ide reset " \
- "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \
- "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
- "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "bootcmd_net=bootp ${kernel_addr} vmlinuz " \
- "&& tftpboot ${ramdisk_addr} initrd.img " \
- "&& setenv ramdisk_len ${filesize} " \
- "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \
- "&& bootz ${kernel_addr} " \
- "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
- "bootcmd_hdd=ide reset " \
- "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \
- "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \
- "&& setenv ramdisk_len ${filesize} " \
- "&& load ide ${hdpart} ${fdt_addr} /dtb " \
- "&& bootz ${kernel_addr} " \
- "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
+ "kernel_addr_r=0x00800000\0" \
+ "ramdisk_addr_r=0x01000000\0" \
+ "fdt_addr_r=0x00ff0000\0" \
+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ "bootcmd_legacy=sata init " \
+ "&& load sata ${hdpart} ${kernel_addr_r} /uImage.buffalo "\
+ "&& load sata ${hdpart} ${ramdisk_addr_r} /initrd.buffalo "\
+ "&& bootm ${kernel_addr_r} ${ramdisk_addr_r}\0" \
+ "bootcmd_net=bootp ${kernel_addr_r} vmlinuz " \
+ "&& tftpboot ${fdt_addr_r} ${fdtfile} " \
+ "&& tftpboot ${ramdisk_addr_r} initrd.img " \
+ "&& bootz ${kernel_addr_r} " \
+ "${ramdisk_addr_r}:${filesize} ${fdt_addr_r}\0" \
+ "bootcmd_hdd=sata init " \
+ "&& load sata ${hdpart} ${kernel_addr_r} /vmlinuz " \
+ "&& load sata ${hdpart} ${fdt_addr_r} /dtb " \
+ "&& load sata ${hdpart} ${ramdisk_addr_r} /initrd.img " \
+ "&& bootz ${kernel_addr_r} " \
+ "${ramdisk_addr_r}:${filesize} ${fdt_addr_r}\0" \
"bootcmd_usb=usb start " \
- "&& load usb 0:1 ${kernel_addr} /vmlinuz " \
- "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \
- "&& setenv ramdisk_len ${filesize} " \
- "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \
- "&& bootz ${kernel_addr} " \
- "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
+ "&& load usb 0:1 ${kernel_addr_r} /vmlinuz " \
+ "&& load usb 0:1 ${fdt_addr_r} ${fdtfile} " \
+ "&& load usb 0:1 ${ramdisk_addr_r} /initrd.img " \
+ "&& bootz ${kernel_addr_r} " \
+ "${ramdisk_addr_r}:${filesize} ${fdt_addr_r}\0" \
"bootcmd_rescue=run config_nc_dhcp; run nc\0" \
- "eraseenv=sf probe 0 " \
- "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \
- " +" __stringify(CONFIG_ENV_SIZE) "\0" \
"config_nc_dhcp=setenv autoload_old ${autoload}; " \
"setenv autoload no " \
"&& bootp " \
"&& setenv ncip " \
"&& setenv autoload ${autoload_old}; " \
"setenv autoload_old\0" \
- "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
- "setenv ncip; setenv gatewayip; setenv ethact; " \
- "setenv bootfile; setenv dnsip; " \
- "setenv bootsource legacy; run ser\0" \
- "restore_env=run standard_env; saveenv; reset\0" \
- "ser=setenv stdin serial; setenv stdout serial; " \
- "setenv stderr serial\0" \
"nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \
- "stdin=serial\0" \
- "stdout=serial\0" \
- "stderr=serial\0"
-
-/*
- * Ethernet Driver configuration
- */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */
-#define CONFIG_PHY_BASE_ADR 7
-#undef CONFIG_RESET_PHY_R
-#endif /* CONFIG_CMD_NET */
-
-#ifdef CONFIG_IDE
-#undef CONFIG_SYS_IDE_MAXBUS
-#define CONFIG_SYS_IDE_MAXBUS 1
-#undef CONFIG_SYS_IDE_MAXDEVICE
-#define CONFIG_SYS_IDE_MAXDEVICE 1
-#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#define CONFIG_SYS_64BIT_LBA
-#endif
#endif /* _CONFIG_LSXL_H */
projects / platform / kernel / u-boot.git / blobdiff